Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Applications
This epoxy enamel is a two-component system consisting of a catalyst and paint. Mix only the amount necessary for immediate use at a ratio of 61 parts catalyst by weight to 100 parts paint by weight. Thoroughly mix before using. The pot life of the mixed material is 6-8 hours. GLYPTAL C-1149 will not cure without the GLYPTAL 74010 hardener.
This material may be applied by brush or spray. If necessary, thin mixed material with ketones (not to exceed one pint per one gallon of mixed materials) to desired consistency. Allow overnight drying between coats. This material should be constantly agitated during use. Surfaces to be painted should be clean and dry.
- Surface Preprations
Surfaces to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove grease and oil by washing surface with mineral spirits. Allow surface to dry thoroughly. When painting over a glossy surface, reduce gloss by using fine sand paper or steel wool.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage (1 mil dried film) | approx. 913 | ft.2/gal | — |
| Weight per Gallon | average. 10.75 | lb/gal | — |
| Flash Point | max. 80 | °F | — |
| Solids by Volume | average. 57 | % | — |
| Pot Life | approx. 6-8 | hours | — |
| Air Dry - Touch | Overnight | — | — |
| Recoat Air Dry Time | Overnight | — | — |