Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Method
- Cure Method
- Suggested Uses
GLYPTAL CE-237 is designed for the finishing of motor end windings. This material is an offset to 7815 and has improved arc resistance.
- Applications
GLYPTAL CE-237 may be applied by spray or dip methods. This material must be kept well agitated during use. Surfaces to be painted should be clean and dry.
- Reduction: Spray: Thin to 25-30 seconds (#2 Zahn Cup) with 1500 Thinner.
- Dip: Thin to 23-28 seconds (#2 Zahn Cup) with Solvesso 100.
- Surface Preprations
Surfaces to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove grease and oil by washing surface with mineral spirits.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Coverage (1 mil dried film) | approx. 675 | ft.2/gal | — |
Solids by Weight | average. 50.0 | % | — |
Air Dry - Tack Free | 3.0 | hours | — |
Hard Air Dry Time | Overnight | — | — |
Bake Time (125°C) | 2021-10-20 | minuntes | — |
Bake Time (95°C) | 20-30 | minuntes | — |
Bake Time (65°C) | 45-60 | minuntes | — |
Gloss | High | — | — |
Flash Point | max. 80 | °F | — |
Safety & Health
- Hazards
Keep away form heat, sparks, and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist. Close container after each use. Use with adequate ventilation.