Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Cure Method
- Suggested Uses
GLYPTAL CE-387 is designed for use on heavy machinery, industrial equipment, interior walls, metal partitions, and laboratory areas.
- Applications
This epoxy enamel is a two-component system consisting of a catalyst and paint. Mix only the amount necessary for immediate use at a ratio of 1 part catalyst by volume to 3 parts paint by volume. Thoroughly mix before using. The pot life of the mixed material is 6-8 hours. GLYPTAL CE387 will not cure without the GLYPTAL 74010 catalyst.
This material may be applied by brush or spray. If necessary, thin mix material with ketones to desired consistency, not to exceed one pint per one gallon of mixed materials. Allow overnight drying between coats. This material should be constantly agitated during use. Surfaces to be painted should be clean and dry.
- Surface Preprations
Surfaces to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove grease and oil by washing surface with mineral spirits. Allow surface to dry thoroughly. When painting over a glossy surface, reduce gloss by using fine sand paper or steel wool.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Coverage (1 mil dried film) | approx. 514 | ft.2/gal | — |
Gloss | 80+ | — | — |
Flash Point | max. 80 | °F | — |
Solids by Weight | average. 53.0 | % | — |
Pot Life | approx. 4-6 | hours | — |
Air Dry - Touch | Overnight | — | — |
Recoat Air Dry Time | Overnight | — | — |