Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- General Processing Recommendations
Green Dot’s Terratek® FX2200 resin needs to be dried before processing. If resin is in a sealed box, dry resin at 90°F to 100°F for 2 to 3 hours. If resin is in an open box, dry resin at 100°F to 120°F for 4 to 5 hours.
For best molding results, larger gates and runners are recommended. The injection pressure required to fill the mold is much higher than typical injection molding grade plastics. Typical injection molding temperatures are listed below, these are only a guide and may need to be changed based on the particular application :
Rear 280°F to 330°F Middle 280°F to 330°F Front 280°F to 330°F Nozzle 280°F to 330°F Processing at temperatures above 350° F and in combination with high shear conditions such as high injection speed may result in thermal degradation of this resin.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1.23 | — | ASTM D792 |
| Melt Index (190°C, 2.06kg) | 57 | g/10 min | ISO 1133 |
| Tensile Strength (Break) | 700 | psi | ASTM D638 |
| Elongation | min. 400 | % | — |
| Hardness | 69A | Shore A | ASTM 2240 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging
Terratek® FX2200 resin is typically packaged in a sealed plastic-lined drum of 250 lbs.
Storage & Handling
- Storing
The product should be stored in a cool, dry, and sanitary area to achieve maximum stability.