Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Sustainability Guide
Biobased Content (ASTM 6866) 16% Biobased Content By Weight 35% Recycled Content 0% Energy Use 4.21 mj/kg Compostable Yes
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
This material is suitable for injection molding, profile extrusion, sheet extrusion, blow molding, and blown film.
- General Processing Recommendations
Drying : Resin must be dried before processing.
Drying Conditions :
- Out of a sealed box : 90° to 100° F for 2 to 3 hours
- Open box : 100° to 120° F for 4 to 5 hours
Suggested Temperature Settings :
Extruder Zone Rear Center Front Nozzle Temperature 280- 330°F 280 - 330°F 280 - 330°F 280 - 330°F Processing at temperatures above 350° F and in combination with high shear conditions such as high injection speed may result in thermal degradation of this resin.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.23 | — | ISO 1183-1 |
Hardness | 74 | Shore A | ISO 868 |
Tensile Strength (Ultimate) | 9.4 | MPa | ISO 37 |
Elastic Modulus | 4.4 | MPa | ISO 37 |
Elongation (Break) | min. 600 | % | ISO 37 |
Tear Strength | 57 | N/mm | ISO 34-1 |
MFI (190°C, 2.2kg) | 57 | g/10min | ISO 1133 |
Compress Set (22 hrs, 23°C) | 33 | % | ISO 815/ASTM D395(B) |
Compress Set (22 hrs, 70°C) | 82 | % | ISO 815/ASTM D395(B) |
Melt Flow | 29.1 | g/10 min | — |
Shrink Rate (Flow Direction) | 0.005 | in/in | ASTM D955 |
Shrink Rate (Trans Flow Direction) | 0.001 | in | ASTM D955 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging
Terratek® GDH-B1FA resin is typically packaged in a sealed plastic-lined fiber drum of 250 lbs.
Storage & Handling
- Storing
The product should be stored in a cool, dry, and sanitary area to achieve maximum stability.