Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Reinforcement Material
- Composite Materials Functions
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- General Processing Recommendations
Green Dot’s Terratek® WC200140 resin needs to be dried before processing if the moisture is above 0.5%. Resin will dry quickly at 150°F in a desiccant dryer. Avoid prolonged resin exposure to air during molding or storage as the material can pick up moisture.
For best molding results, larger gates and runners are recommended. The injection pressure required to fill the mold is much higher than typical injection molding grade plastics. Typical injection molding temperatures are listed below, these are only a guide and may need to be changed based on the particular application :
Rear 350°F to 360°F Middle 350°F to 360°F Front 360°F to 375°F Nozzle 360°F to 375°F Mold 60°F to 170°F The melt temperature of the resin should remain below 400°F to prevent the material from discoloring and having a burnt odor.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity | 1 | g/cm³ | ASTM D792 |
| Shrinkage | 0.013 | in/in | ASTM D955 |
| Melt Index (190°C, 2.06kg) | 7 | g/10 min | ASTM D1238 |
| Tensile Strength (Break) | 2900 | psi | ASTM D638 |
| Tensile Modulus | 252466 | psi | ASTM D638 |
| Elongation | 5.23 | % | — |
| Notched Izod | 0.6 | ft lb/in | ASTM D256 |
| Flex Strength | 5814 | psi | ASTM D790 |
| Flex Modulus | 210000 | psi | ASTM D790 |
Packaging & Availability
- Packaging Type
- Packaging
Terratek® WC200140 resin is typically packaged in a sealed plastic-lined Gaylord at 1200 lbs/Gaylord.
Storage & Handling
- Storing
The product should be stored in a cool, dry, and sanitary area to achieve maximum stability.