company tower banner
Gryphin Co. Company Logo

Gryphin Co. G-1191

G-1191 Non-Skid is a lightweight, non-slip floor and deck covering compound developed for use over aluminum, steel, wood, concrete or polyester. This material is used on areas subject to foot traffic in confined spaces. It is long wearing with a hard, non-porous surface and is resistant to extreme temperatures. G-1191 Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based, it is easy to apply, especially in areas where solvents are a problem.

Product Type: 1K (1 component) Coating, Waterborne Coating

Features: High Temperature Resistance, Light Weight, Skid Resistant, Wear Resistant

Compatible Substrates & Surfaces: Aluminum, Concrete, Metal, Plastics, Steel, Wood

Application Method: Brush, Spray

    Knowde Enhanced TDS

    Identification & Functionality

    Features & Benefits

    Applications & Uses

    Application Method
    Compatible Substrates & Surfaces
    Surface Preparation

    In order to obtain optimum adhesion to a surface, that surface must be free of all foreign matter. This one-part water- based system can be applied directly over prepared concrete or over G-249 of G-250 primer when applied over wood, steel, aluminum or polyester.

    Method of Application

    An excellent surface profile may be obtained with a brush or short-nap roller. Gryphin G-1191 Non-Skid may also be applied with spray equipment, using an agitated bottom feed pot with 3/4" hose, 1/4"'fluid nozzle, and 1/4" airtip.

    Curing Timeat 70°F 24 hours (foot traffic).

    Thickness and Coverage

    When applied by roller or brush at an aver-age of 20 mils film thickness, each gallon will cover approximately 50 square feet. When applied by spray at an average film thickness of 15 mils each gallon will cover approximately 55 square feet.

    Clean-up

    Because G-1191 Non-Skid is water-based, equipment used for application can be cleaned with water.

    Properties

    Technical Details & Test Data

    Coefficient of Friction Characteristics

    Due to its high coefficient of friction under wet or oily conditions, Duradeck provides an excellent non-skid surface for all types of flooring. The coefficient of friction values shown in the following bar graphs were obtained with an Olsen Medical Products Horizontal Pull Slipmeter, and assumes the use of rubber-soled safety shoes. Surface conditions that gave a coefficient of friction of less than 0.50 are considered slippery. The bar graphs demonstrate the vast superiority of Duradeck over other types of floor surfaces.

    Gryphin Co. G-1191 - Coefficient of Friction CharacteristicsGryphin Co. G-1191 - Coefficient of Friction Characteristics - 1Gryphin Co. G-1191 - Coefficient of Friction Characteristics - 2

    Safety & Health

    Caution

    Contains combustible solvent. Use with adequate ventilation. Keep out of reach of children. Do not breathe vapors.Solely for industrial and commercial use. Avoid skin contact during application; may cause minor skin or eye irritation.

    Eye Contact : Wash/Flush immediately with low pressure flowing water for at least 15 minutes. Be sure entire eye is flushed. Get medical attention at once.

    Skin Contact : Remove contaminated clothing at once. Use disposable wipes to take liquid off the skin before cleaning. Clean skin immediately with soap and water. Do not use shop solvents to clean the skin. If there is any sign of redness, itching, or a burning, get medical attention. Launder clothing before re-use. If material is accidentally swallowed, get medical attention immediately.

    Packaging & Availability

    Availability

    Gryphin G- 1 191 Non-Skid is available:

    • Dark
    • Gray
    • Yellow
    • Red
    • Green and White