Products

Gryphin G-2216 Non-Skid is a two-component, heavy-duty epoxy non-skid coating containing a synthetic resinous binder system and abrasive particles. This material was designed for use over Gryphin G-249 Epoxy Primer or Gryphin G-250 Chelating Primer. This system can be used on steel, aluminum or concrete when a heavy-duty non-skid is required. G-2216 Non-Skid features excellent resistance to oils, grease, hydraulic fluids, detergent solutions, salt water, alcohol, gasoline, and most acids. Because of its excellent resistance to wear and extreme temperature changes, G-2216 Epoxy Non-Skid will provide years of service if properly applied.

G-1191 Non-Skid is a lightweight, non-slip floor and deck covering compound developed for use over aluminum, steel, wood, concrete or polyester. This material is used on areas subject to foot traffic in confined spaces. It is long wearing with a hard, non-porous surface and is resistant to extreme temperatures. G-1191 Non-Skid contains a synthetic, resinous binder and abrasive particles. Because it is water-based, it is easy to apply, especially in areas where solvents are a problem.

G-501-MI-7 formulation is the same as the formulation for G-501 except G-501-MI-7 contains a lighter, static-eliminating ingredient. On a volume basis, G-501-MI-7 coating is half the weight of a G-501 coating.

G-249 Epoxy Primer was developed specifically as a preparatory coating for a variety of surfaces including aluminum, steel, concrete, wood and polyester. It is an excellent priming coat for Gryphin DURADECK Non-Skid deck-covering compounds. G-249 Epoxy Primer is a two-part material containing a synthetic resinous binder and an accelerator or curing agent.

G-250 Chelating Primer was developed as a one part anticorrosion primer for aluminum and steel. It also is an excellent primer for the Gryphin DURADECK Non-Skid Coatings.

G-501 Epoxy Non-Skid is a lightweight, non-slip deck covering compound developed for use on aluminum, steel, wood, concrete or polyester. This two-part system meets all the requirements of MIL-D-23003 (Ships) Type H. It is designed for use over Gryphin’s G-249 Primer and G-250 Primer. G-501 Epoxy Non-Skid contains a synthetic resinous binder and abrasive particles. It is easy to apply, economical to use and durable.

G-350 Chelating Coating is High performances, one-part, surface-tolerant, anti-corrosion coating that bonds chemically with the metal substrate. Resulting protective layer is far stronger than that formed by conventional coatings. G-350 provides exceptional protection for areas where fire resistance, low VOC, and low dry film weight are a consideration.