Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Origin
China.
Features & Benefits
- Ready-to-Use Product Features
- Features
- One-part, neutral curing, no corrosive effect on materials and easy to use
- Good adhesion to various materials such as glass, metal (except copper) and plastic, and non-corrosive.
- Fast deep curing and excellent electrical insulation performance
- Excellent high and low temperature resistance, little change in performance from -60 °C to +200 °C
Applications & Uses
- Markets
- Applications
- Applications
- Bonding and sealing of various household appliances
- Insulation and sealing of various heating elements
- Bonding and sealing applications in other industries
- Methods of Use
- The sealant should be applied in an environment with a temperature of 4℃~ 40℃and a relative humidity of 40%~80%.
- In order not to affect the bonding effect, all surfaces are recommended for degreasing and decontamination, and to ensure clean and dry. Suitable solvents include isopropanol, acetone or methyl ethyl ketone.
- Apply the sealant to the surface that has been pretreated and then quickly cover the other side that needs to be bonded.
- When exposed to moisture, the sealant crusts within 10 to 20 minutes at room temperature and 50% relative humidity. Apply a tool to scrape off excess sealant before the surface is crusted.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Tack Free Time | 8~20 | min | GB/T 13477 |
Density | 1.32 ± 0.02 | g/ml | GB/T 13477 |
Hardness | 35~45 | Shore A | GB/T 531 |
Tensile Strength | min. 1.5 | MPa | GB/T 528 |
Elongation At Break (Cured-After 21 Days At 23°C (73°F) And 50% Rh) | min. 350 | % | GB/T 528 |
Volume Resistivity | min. 2.0×10^15 | Ω.cm | GB/T 1692 |
Dielectric Strength (After Total Curing) | min. 18 | KV/mm | GB/T 1695 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Matters Need Attention
Sealant products are not toxic after they are fully cured, but should avoid contact with eyes before curing. If contact with eyes, rinse with plenty of water and consult a doctor.uncured products should be kept out of contact with children. The product will release small molecular substances during the curing process, and ventilation should be paid attention to in the construction and curing areas to prevent the concentration of small molecular substances from being too bad for people.
Packaging & Availability
- Packaging Type
- Packing
Plastic Cartridge. NET: 300ml
Minimum Order Quantity: Cartridge / Sausage Packaging 1000PCS
Delivery Time: 7-14days
Supply Ability: 1000000PCS/month
Storage & Handling
- Shelf Life
Storage life is 9 months (keep in shade and dry at the temperature between -20℃ and +27 ℃)