Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Category
Epoxy Primers
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- A high performance primer on properly prepared carbon steel, galvanized steel, and aluminum where:
- Recoating in 90 minutes is possible for maximum productivity.
- No induction time and longer pot life will improve productivity.
- A smooth, sandable primer, at 3 mils DFT, for maximum appearance when topcoating is required.
- A high build primer, up to 6 mils DFT, over abrasive blasted or power tool cleaned substrate is needed for
- additional corrosion resistance.
- Application by brush and roller, in addition to spraying, may be necessary.
- Spray application with minimal dry spray is desired.
- Application at temperatures as low as 35°F is needed. Will cure down to 20°F.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Uses
An excellent, fast recoat; sandable, production primer for fleet, rail, construction equipment, transportation equipment, and many OEM applications. An ideal epoxy primer for structural steel, tanks, vessels, equipment, to name a few. For use in chemical processing plants, pulp and paper mills, fertilizer plants, petroleum refineries, electric generating stations, coal handling operations, food processing plants and other industrial facilties where recoating in 60 minutes @ 90°F and 105 minutes @ 75°F is required for maximum productivity.
- Application
Spray, brush or roller
- Pot Life
5 hours @75°F / 2.5 hours @ 85°F
- Recoat Tme
105 min. @ 75°F (2 mils DFT)
- Mixing Ratio
2:1 by volume. Mix 2 parts Base (Part A) to 1 part Hardener (Part B)
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Finish | Flat | — | — |
| Volume Solids | 52.43 - 59.57 | % | — |
| Coverage (Theoretical, 1.0 mil DFT) | 898.0 | sq. ft. | — |
| Recommended Thickness (300 sq. ft. per gallon. ) | 3.0 | mils DFT | — |
| Recommended Thickness (150 sq. ft. per gallon) | max. 6 | mils DFT | — |
| Application Temperature | 35 - 120 | °F | — |
| Dry Service Teperature | max. 220 | °F | — |
| Induction Time | None | — | — |
| Thinning | 5-15% SA-65 Reducer per gallon | — | — |
| V.O.C. | 2.8 (low HAPS) | lbs./gal. | — |
Packaging & Availability
- Packaging
15 gallon & 3 gallon units