Products

Di-n-butyl maleate (DBM) is an internal plasticizer that can be copolymerized with monomers such as vinyl chloride, vinyl acetate, and styrene. Copolymers are commonly used in coatings, films, adhesives, rubbers, pigment fixatives, etc. When this product is used in polyvinyl chloride products, it can make the products soft, smooth and transparent. It has strong solvent capacity and can effectively plasticize resins that are generally not easy to plasticize (such as acrylonitrile and methacrylate resins).

Tributoxyethyl phosphate (TBEP) is a flame retardant plasticizer for plastics and rubber. It has excellent low temperature flexibility, flame retardancy and durability, can improve processing performance and shorten the kneading period. It can also be used as a plasticizer for nitrocellulose, ethyl cellulose, and acrylic plastics, which can make the products have transparency and good UV resistance.

Diethyl maleate (DEM) Slightly soluble in water, easily soluble in ethanol and ether. Diethyl maleate (DEM) can be used as polymer compound monomers and pesticide intermediates.

Dioctyl Sebacate (DOS) is an excellent cold-resistant plasticizer with high plasticizing efficiency, low volatility, good heat resistance, light resistance and electrical properties. Mainly used for polyvinyl chloride, vinyl chloride copolymer, cellulose and synthetic rubber. It has high mobility and is often used in combination with phthalates.

Monoethyl maleate (MEM) is a colorless transparent oily liquid, easily soluble in water, ethanol, etc. It is mainly used as polymer compound monomers, pharmaceutical intermediates, etc.

Triethyl Phosphate (TEP) is soluble in ethanol, ether, benzene and other organic solvents. It is also soluble in water, but it will gradually hydrolyze as the temperature rises. It is widely used as a plasticizer for rubber and plastics, as a raw material for the preparation of agricultural pesticides, as an ethylating agent, and as a catalyst for the production of ketene.

Dimethyl phthalate (DMP) is compatible with a variety of cellulose resins, rubber and vinyl resins, and has good film-forming properties, adhesion and water resistance. It is widely used as a solvent for peroxide methyl ethyl ketone and fluorine-containing anticorrosive coatings. It can be used as a plasticizer for resins such as cellulose acetate, as well as a solvent for mosquito repellent and organic synthesis intermediates.

Trioctyl Phosphate (TOP) is mainly used as a working solvent in the anthraquinone hydrogen peroxide production process, instead of hydrogen terpene pinitol, with low volatility and high extraction partition coefficient. It is an ideal solvent. It can also be used as a cold-resistant and flame-retardant plasticizer for vinyl resins, cellulose resins and synthetic rubbers, and its low temperature performance is better than that of adipates.

Diallyl phthalate (DAP) is insoluble in water, but soluble in most organic solvents. It is used as a crosslinking agent for polyvinyl chloride resin and a plasticizer for fiber resin.

Di-n-butyl adipate (DBA) is soluble in ether and ethanol, but insoluble in water. It is mainly used as a plasticizer for vinyl resin, cellulose resin and synthetic rubber. It is also used as a solvent and used in organic synthesis.

Di-n-butyl phthalate (DBP) is compatible with a variety of cellulose resins, rubber and vinyl resins, and has good film-forming properties, adhesion and water resistance. It is widely used as a solvent for peroxide methyl ethyl ketone and fluorine-containing anticorrosive coatings. It can be used as a plasticizer for resins such as cellulose acetate, as well as a solvent for mosquito repellent and organic synthesis intermediates.

Dimethyl adipate (DMA) is compatible with alcohol, ether, ester and other substances, and is insoluble in water. It can be used in organic synthesis and resin plasticizer.

Diisobutyl maleate (DIBM) is an internal plasticizer and can be used with vinyl chloride, vinyl acetate, vinylidene chloride and styrene Copolymerization of other monomers. It can also be used as an organic intermediate for the synthesis of anti-ultraviolet agents and other products.

Diethyl phthalate (DEP) has good compatibility with most resins such as vinyl resin and cellulose. Often used as a cellulose resin plasticizer, with good low temperature flexibility and durability. Combined use with DMP can improve the water resistance and elasticity of the product. It can also be used as a fragrance diluent, lubricant, gas chromatography stationary liquid, etc.

Dioctyl Fumarate (DOF) is insoluble in water and easily soluble in organic solvents. It is compatible with most synthetic resins and rubbers, but is not compatible with water-soluble polymers. It is an internal plasticizer with low volatility. It can be copolymerized with a variety of monomers, and the resulting copolymer is used to reinforce plastics, ion exchange resins and rubbers.

Diethyl Adipate (DEA) is soluble in ethanol and other organic solvents, but insoluble in water. It can be used as an organic compound. Hexanediol can be prepared by hydrogenation reduction, and it can also be used in daily chemical industry and food industry.

Dioctyl phosphate (P-204) is corrosive to metals to a certain extent when exposed to water. It can be used as a synthetic intermediate for organic solvents, surfactants, plastic antistatic agents, etc., can be used as a substitute for fatty alcohol phosphate and can be used as a rare earth metal extractant. It can be used in textile auxiliaries, plastic antistatic agents, surface wetting agents, etc.

Diisobutyl Sebacate (DIBS) has good compatibility and can be compatible with many resins such as polyvinyl chloride, vinyl chloride and vinyl acetate copolymer, polystyrene, nitrocellulose and so on. This series of cold-resistant plasticizers has good plasticizing effect, good thermal and light stability, and is often used in combination with phthalate plasticizers with good durability.

Dimethyl maleate (DMM) is an internal plasticizer that can be copolymerized with monomers such as vinyl chloride, vinyl acetate, vinylidene chloride and styrene. It can also be used as an organic intermediate for the synthesis of anti-ultraviolet agents and other products.

Monoethyl Adipate (MEA) is widely used as an intermediate for vitamins and other organic chemical synthesis.

Dimethyl Sebacate (DMS) has good compatibility with various cellulose resins, vinyl resins and polymethacrylates and many other resins. It can be used as a plasticizer, softener and solvent for cellulose resin, vinyl resin and synthetic rubber. It can be used as an intermediate in organic synthesis and a stationary liquid for gas chromatography.

Di-n-butyl sebacate (DBS) has good compatibility and can be compatible with many resins such as polyvinyl chloride, vinyl chloride and vinyl acetate copolymer, polystyrene, nitrocellulose, etc. This series of cold-resistant plasticizers has high plasticizing efficiency, good thermal and light stability, but high volatility, and is often used in combination with phthalate plasticizers with good durability.

The plasticizing effect of this product is similar to DBP, but the volatilization and water extraction are greater. It is often used as a substitute for DBP and is widely used in cellulose resin, vinyl resin, rubber, etc. It is toxic to crop seedlings and should not be used for agricultural PVC films.

Dicyclohexyl phthalate (DCHP) is soluble in common organic solvents such as acetone, ether, n-butanol, toluene, etc. It is difficult to dissolve in water. It has good compatibility with most resins such as cellulose acetate, polyvinyl chloride, polystyrene, and chlorinated rubber. It is used as the main plasticizer of polyvinyl chloride, cellulose resin, etc.

Diethyl Fumarate (DEF) Slightly soluble in water, easily soluble in ethanol and ether. It can be used as a polymer compound monomer and organic synthesis intermediate.

Tributyl phosphate (TBP) is soluble in ethanol and other common organic solvents, and slightly soluble in water. The solubility of water in this product is 7% (25°C). But as the temperature rises, it will gradually hydrolyze. It is widely used as a plasticizer for nitrocellulose, cellulose acetate, chlorinated rubber, and polyvinyl chloride; as a solvent, defoamer and antistatic agent for coatings, adhesives, and inks; it can also be used as a rare Metal extractant. However, this product has low boiling point and large volatilization loss, and its application in plasticizers is relatively limited.