Products

Venadol® DF 110 L, boasting APEO-Free labeling claims, ideal for agrochemical applications. This liquid agrochemical features excellent foam control, ensuring improved substrate wetting and longer performance life.

T-Det® N 307 is a 70% active solution of T-Det® N 30, a nonionic surfactant produced by the reaction of nonyl phenol with 30 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® N 507 is a 70% active solution of T-Det® N 50, a nonionic surfactant produced by the reaction of nonyl phenol with 50 moles of ethylene oxide. It is compatible with anionic surfactants and is stable in the presence of acids, bases, and salts.

T-Det® N 407 is a 70% active solution of T-Det® N 40, a nonionic surfactant produced by the reaction of nonyl phenol with 40 moles of ethylene oxide. Its nonionic structure makes it compatible with anionic surfactants and it is stable in the presence of acids, bases, and salts.

T-Det® A 1330-7 is a 70% active polymeric surfactant without APE (alkylphenol ethoxylates), made for use in emulsion polymerization systems. It can act as a standalone primary emulsifier or be used with other co-surfactants. Its special reaction profile reduces the levels of polyethylene glycols, which can cause problems in latex production and post-processing. This product can be added later in the production process of acrylic latexes to improve stability against changes in viscosity, thickening under stress, and separation during freeze-thaw cycles. This surfactant is suitable for both acrylic and styrene-acrylic latexes.

Harcros Chemicals Antifoam WT is a versatile antifoam with multiple uses. It is a silicone and oil-free antifoam that can be used in reverse osmosis, ultrafiltration, and membrane water treatment systems. Other uses include paper processing, textile dyeing, plastic recycling, and water-based coatings. It has a low viscosity, dilutes easily in water, and has good knockdown and durability. This product has indirect food contact approvals.

T-Det® A 1340 is a polymeric surfactant that is APE-free and designed for use in emulsion polymerization systems. It can be used alone or in combination with other co-surfactants, and it has a unique reaction profile with low levels of polyethylene glycol. This product can be post-added to acrylic latexes to provide stability against viscosity creep, shear thickening, and freeze-thaw separation. T-Det® A 1340 is useful for both acrylic and styrene-acrylic latexes and is a solid that melts at 47°C. It can be solubilized in water with mild agitation.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

Harcros Chemicals Antifoam 10 Food Grade is a 10% antifoam emulsion of polydimethylsiloxane designed for defoaming aqueous systems. It is exceptionally easy to dilute and disperse. This product maintains its effectiveness at temperatures up to boiling. Although designed primarily for food applications, it can also be used in many industrial processes. For effective defoaming, concentrations ranging from 10 to 100 ppm are required.

T-Det® A 91-2.5 is a clear to hazy liquid surface-active agent that is anhydrous and produced by the reaction of an alcohol with 2.5 moles of ethylene oxide. The product has a hydroxyl value and is a liquid surfactant blend based on alcohol ethoxylates and alkyl phenol ethoxylates. T-Det® A 91-2.5 is a versatile emulsifier, wetting agent, and detergent used in a variety of industrial applications, including petroleum products, textiles, and cleaning.

T-Det® XD is a polyalkalene glycol monobutyl ether surface active agent primarily used as an emulsifier and dispersing agent. It is useful in a variety of industrial applications, such as pigment, paper coating, and polymer dispersant. Additionally, it is a good emulsifying agent for aromatic compounds and similar solvents, making it suitable for agricultural, insecticide, and pesticide formulations, as well as latex resin polymerization and metalworking fluids.

T-Det® N 7 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 7 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

T-Det® SAE 5 is a superior surfactant that is designed to provide outstanding wetting and rinseability properties. Its excellent formulation and handling properties make it easy to work with in various applications. With a low odor, it is ideal for use in sensitive applications where odor control is important. It has a narrow gel range, making it an ideal choice for formulators looking for a consistent, reliable product. Whether you need a surfactant for industrial or personal care applications, T-Det® SAE 5 is an excellent choice.

H-Sil® 1108 is a low-molecular-weight, nonionic silicone polyether surfactant blend that imparts low surface tensions to formulated products. This product improves the spreading and wetting properties of household, industrial, and coating products. In spray adjuvant applications, it gives aqueous surface tensions of less than 23 mN/M.

T-Mulz® ADP is an additive used to improve the adhesion of paint film on non-ferrous substrates such as aluminum, zinc, copper, brass, and electroplated steel. It is typically used in stoving paints and promotes adhesion of stoving paints on difficult non-ferrous substrates. Additionally, it improves the paint films flexibility and impact resistance.

Harcros Chemicals Antifoam HL 52 is a non-silicone, 100% active defoamer that is designed to be as effective as silicone-based defoamers. It consists of a highly efficient and effective blend of defoaming ingredients. This blend exhibits excellent performance in a broad range of applications, including water-based paints, inks and coatings, chemical processing (both batch and continuous), textiles and textile finishes, and latex adhesives.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

T-Det® N 4 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 4 moles of ethylene oxide. It is used as a gasoline additive to prevent gas line freezing and carburetor. Non-ionics are stable, non-corrosive products in an anhydrous state.

T-Mulz® 565-2 is a blended anionic surfactant designed primarily for making emulsifier systems for agricultural, latex, and industrial formulations. It provides coupling ability, emulsification power, and rapid wetting to the formulation. As supplied, it is a free acid and will react readily with basic compounds.

Harcros Chemicals Antifoam 100 Industrial Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcros Chemicals Antifoam AF 100 IND is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. This product is primarily used in non-aqueous industrial applications where silica fillers can be tolerated.

Harcryl® 1228 M is a free acid phosphate ester of 2-HEMA (hydroxyethyl methacrylate). It is predominantly composed of the monoalkyl phosphate ester, making it easy to incorporate into a variety of polymer systems. The ratio of mono-alkyl to dialkyl phosphate makes Harcryl® 1228 M more hydrophilic than Harcryl® 1228. In addition, it is inhibited by the addition of 400 ppm hydroquinone.

T-Det® N 8 is an anhydrous liquid nonionic surface-active agent produced by the reaction of nonylphenol with 8 moles of ethylene oxide. Non-ionics are stable, non-corrosive products in an anhydrous state. They are used in agricultural chemicals, dry cleaning, emulsifier, leather processing, metal processing, petroleum products, and paper processing.

Harcros Chemicals Antifoam 30 Industrial Grade is a 30% antifoam emulsion of polydimethylsiloxane. It is water-dilutable and designed primarily for use in industrial products and processes. This product is not intended for use in food or drug processing. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

T-Det® A 1340-7 is an APE-free, 70% active polymeric surfactant designed for use in emulsion polymerization systems. It can be used as the primary emulsifier or with co-surfactants and has a unique reaction profile with low levels of polyethylene glycol. This product provides stability against viscosity creep, shear thickening, and freeze-thaw separation when post-added to acrylic latex. It is useful for both acrylic and styrene-acrylic latex.

T-Det® SAE 7 is a premium-quality surfactant that offers superior wetting and rinseability, making it a highly efficient ingredient for various personal care and cleaning applications. The excellent formulation and handling properties of T-Det® SAE 7 make it easy to incorporate into a wide range of products, ensuring consistent and reliable results. Additionally, it has a low odor, making it an ideal choice for those who are sensitive to strong scents. Its narrow gel range ensures its usage in a wide range of products without causing any unwanted thickening or thinning.

Venadol® 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol® 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 20 is an effective weitting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 65 is a low foaming weitting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.

Venadol® 104PG is a 75% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol® 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free.

Venadol® 85 is an effective weitting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free.