Products

Harcros Chemicals Antifoam 8810 Food Grade is a 10% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

H-Sil® EM-FS-50 is a fluorosilicone-in-water emulsion that uses nonionic emulsifiers. This unique emulsion is specially formulated for hard surface polishes. The fluoro portion of the molecule adds protection from greasy and waterborne soils, and the silicone portion provides gloss and additional protection from outdoor elements. It is an excellent product for formulating spray-on and wipe-off transportation polishes and protectants.

H-Sil® OE is a silicone-based odor eliminator designed for industrial and consumer applications. This product acts as an odor eliminator by neutralizing the nitrogen groups that are present in most odors. It is a concentrate that can be diluted at 5 - 10% by weight in water for most applications. No other additives are needed. Fragrances can be added to the dilution by using common surfactants and fragrance bases. 5% dilutions of H-Sil® OE were successfully compared against leading industrial and consumer products via a test panel, and it consistently outlasted the competitors. At a use level of 5 - 10%, this product was successfully tested against the following odors:

• Smoke
• Butyric acid (body odor)
• Amine odors
• Urine
• Ammonia

Harcros Chemicals Antifoam 8820 Food Grade is a 20% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

Harcros Chemicals Antifoam 100 Food Grade is a 100% active silicone compound that provides an efficient and economical means of preventing costly and dangerous foaming conditions in aqueous and non-aqueous systems. It can be used in the manufacture of food packaging materials and as a direct food additive. This product exhibits excellent dilution stability when diluted with aliphatic, aromatic, and chlorinated solvents.

H-Sil® D4 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.

Harcros Chemicals Antifoam 30 Food Grade is a 30% antifoam emulsion of polydimethylsiloxane that is water-dilutable and designed primarily for use in food processing. It is also recommended for many industrial applications, such as textile dyeing and finishing, leather finishing, latex processing, soap and detergent manufacture, and boiler water defoaming. Concentrations of the emulsion required for effective defoaming range from 5 to 100 ppm.

H-Sil® EM-60 HG is a proprietary blend of silicone fluids and reactive organo-silicones emulsified into a high-solids emulsion. It is designed to provide premium performance as a tire and vinyl dressing. This product is easily diluted with water to form a stable dispersion for use levels ranging from 10 to 20% actives. A 20% active product gives excellent all-round performance by delivering a high-gloss, durable (several washings) coating to tires and vinyl.

Harcros Chemicals Antifoam 8830 Food Grade is a 30% active emulsion of polydimethylsiloxane formulated to control foam in both food and industrial processing. This defoamer is readily diluted with water or process liquids for easy addition to foam-generating solutions. It efficiently controls foam in nonionic, cationic, and anionic systems over a wide pH range.

H-Sil® D5 is a volatile cyclic dimethyl silicone fluid that is clear and odorless. This low-toxicity solvent evaporates completely at room temperature and leaves no residue. It is widely used in cosmetics to provide spreading, easy rub-out, and a slick, non-greasy feel to the skin. It is a good cleaning solvent for industrial applications with degreasing properties for dry cleaning and spot treatment applications.

T-Soft® PSMO 20 is an oleic acid ester of sorbitol and its mono- and dianhydrides copolymerized with approximately 20 moles of ethylene oxide.

T-Soft® ALES-2 is an ammonium lauryl ether sulfate for the healthcare and emulsion polymerization industries and contains 2 moles of E.O.

Estecare™ P80 is an oil-in-water emulsifier that is primarily used in combination with Estecare SMO. This combination of high and low HLB emulsifiers produces medium, fine-textured lotions and creams for skin and hair care applications. Estecare™ P80 also functions as a spreading aid for many industrial applications and provides water-dispersibility to anhydrous systems. Additionally, Estecare™ P80 can be used as a solubilizer for oils and fragrances.

Estecare™ P20 is an oil-in-water emulsifier that is primarily used in combination with Estecare SMO. This combination of high and low HLB emulsifiers produces medium, fine-textured lotions and creams for skin and hair care applications. Estecare™ P20 also functions as a spreading aid for many industrial applications and provides water-dispersibility to anhydrous systems. Additionally, Estecare™ P20 can be used as a solubilizer for oils and fragrances.

EsteCare™ 12 AT is a classical emulsifier for creams and lotions. It has many uses, such as surfactants in detergent formulations both, industrial and domestic. These are also used as cleaning agents, scouring agents, wetting agents and dispersants or emulsifiers in textile formulations. It is also used as emulsifiers, solubalizers in cosmetics and health care formulations.

EsteCare™ 21 BN is an ethoxylated product of hydrogenated castor oil. It is a multifunctional oil-in-water emulsifier that is a very versatile and multifunctional non-ionic surfactant used as fragrance builder and fragrance solubilizer, emulsifier.

EsteCare ™ 120AJ is a classical emulsifier for creams and lotions. It has many uses, such as surfactants in detergent formulations both, industrial and domestic. These are also used as cleaning agents, scouring agents, wetting agents and dispersants or emulsifiers in textile formulations. It is also used as emulsifiers, solubalizers in cosmetics and health care formulations.

H-Sil® EM-HTS Concentrate is a nonionic emulsion of hydroxy functional silicone fluid designed to provide superior performance in a variety of applications, including:

• Tire and vinyl dressings
• Polishes and waxes for hard surfaces
• As a performance booster to standard silicone emulsions
• As a durable release agent

H-Quest® C 100 sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

H-Quest® B 105 sodium glucoheptonate has many industrial uses as a high-performance chelating agent. Its superior performance in the pH range between 9 and 14 is due to its efficiency in forming stable chelates with divalent and trivalent metal ions such as Ca+2, Mg+2, Fe+2, Fe+3, Zn+2, Al+3, etc.

Harcros Chemicals SIlicone Elastomer 8000 is a clear to hazy liquid used as a low-viscous stabilizer for skincare, haircare, antiperspirants, deodorants, sunscreens, styling aids, and color cosmetic formulas. This elastomer gives a light smoothness and silky feel, and it reduces tackiness in formulas.

H-Sil® EM-60 Concentrate is a 60% active nonionic emulsion of regular viscosity silicone. This product can be used as-is or diluted with water to form a stable emulsion letdown. It is formulated to provide excellent gloss, lubrication, and protection to a variety of surfaces. This product is an excellent ingredient for formulators to use in automotive tire and vinyl dressings, including polishes and waxes for automobiles and other hard surfaces.