Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Industrial Additives Functions
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Industrial Additives Features
Applications & Uses
- Markets
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Product Uses
- HD-2001 DMM was designed for use in textile applications that require a soft hand coupled with very good strength, abrasion resistance, excellent adhesion, and excellent resiliency.
- Due to its overall properties, HD-2001 DMM can be used as a finish or a coating.
- This versatile urethane is ideally suited for use as a finish for nylon and polyester threads and as a coating for nylon and vinyl substrates.
- HD-2001 DMM is also ideally suited for textile-coating applications that require excellent low temperature flex crack resistance.
- The low melt temperature also allows HD-2001 DMM to be used as a heat seal coating.
- When properly formulated, HD-2001 DMM can be used as a coating for awning fabrics, boat cover fabrics, and other architectural fabrics
- Product Applications
- HD-2001 DMM may be used as a sole vehicle or blended with acrylic emulsions.
- Viscosity modification can be made with associative thickeners for application by spray, knife-over-roll, or other methods.
Properties
- Physical Form
- Physical Properties
- Mechanical Properties (TPE)
Value | Units | Test Method / Conditions | |
Solids | 34 - 36 | % | — |
Viscosity | 50 - 500 | cps | — |
pH | 7.5 - 10.0 | — | — |
Density | 8.9 | lbs/gal | — |
Softening Point | 265 | °F | — |
VOC Content | 129 | gm/l | — |
Value | Units | Test Method / Conditions | |
Elongation | 550 | % | Tested at 20 inches/minute |
Tensile Strength | 4000 | psi | Tested at 20 inches/minute |
100% Modulus | 500 | psi | Tested at 20 inches/minute |
200% Modulus | 900 | psi | Tested at 20 inches/minute |
300% Modulus | 1500 | psi | Tested at 20 inches/minute |
Technical Details & Test Data
- Curing
- Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Do not use crosslinking agents for heat-seal coating applications.