Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Product Applications
HD-2504 may be used as a sole vehicle or blended with acrylic emulsions for application by conventional or air-assisted spray equipment. It may be thickened with associative thickeners to attain desired application rheology
Properties
- Physical Form
- Physical Properties
- Mechanical Properties (TPE)
Value | Units | Test Method / Conditions | |
Solids | 34 - 36 | % | — |
Viscosity | 50 - 500 | cps | — |
pH | 7.5 - 10.0 | — | — |
Density | 1.06 | lbs/gal | — |
VOC Content | 100 | gm/l | — |
VOC Content (less water) | 240 | gm/l | — |
Softening Point | 350 | °F | — |
Sward Hardness | 50 | — | — |
Value | Units | Test Method / Conditions | |
Elongation | 100 | % | Tested at 2 inches/minute |
Tensile Strength | 7800 | psi | Tested at 2 inches/minute |
100% Modulus | 5200 | psi | Tested at 2 inches/minute |
Technical Details & Test Data
- Curing
- HD-2504 may be air dried at ambient temperatures with the addition of 7 - 8% DPnB coalescing solvent.
- For thermal curing 5 - 7% DPnB co-solvent addition is recommended.
- Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.