Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
Applications & Uses
- Markets
- Application Method
- Compatible Polymers & Resins
- Coating Type
- Product Uses
L-2357 was designed for a variety of coating and adhesive applications where the chemical- and thermal-resistance of a crosslinked system are required, but the use of a multiple component system is neither feasible nor desirable.
- Product Applications
- L-2357 can be used as supplied or blended with acrylic emulsions for spray or rotogravure applications.
- It can be thickened with associative thickeners for knife-over-roll or similar methods.
Properties
- Physical Form
- Physical Properties
- Mechanical Properties (TPE)
| Value | Units | Test Method / Conditions | |
| Solids | 34 - 36 | % | — |
| Viscosity | 50 - 150 | cps | — |
| pH | 9.0 - 10.0 | — | — |
| Density | 8.6 | lbs/gal | — |
| VOC Content | 16 | gm/l | — |
| Softening Point | 325 | °F | — |
| Value | Units | Test Method / Conditions | |
| Elongation | 380 | % | Tested at 20 inches/minute |
| Tensile Strength | 4500 | psi | Tested at 20 inches/minute |
| 100% Modulus | 1500 | psi | Tested at 20 inches/minute |
| 200% Modulus | 2000 | psi | Tested at 20 inches/minute |
Technical Details & Test Data
- Drying
L-2357 can be air dried, if desired, depending on film thickness. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.