Products

Ensolite® a closed-cell foam material made from a blend of Poly Vinyl Chloride (PVC) and Nitrile Butadiene Rubber (NBR) It provides a broad range of compression densities. It is for applications in industrial gasketing, flotation insulation and athletic padding. It is a 3.5 to 9.0 pounds per cubic ft. closed-cell PVC (Polyvinyl Chloride) foam. It can be used over a temperature range of -20°F to 250°F.

Crosslinked Foam contains cross-linked bonds in the polymer structure that changes a thermoplastic into an elastomer. Crosslinked Foam is for industrial, orthopedic, and construction use where durability is required.

Anti-Static Polyethylene is a closed-cell foam for static discharge protection. It provides critical protection to sensitive electronic parts and products. Anti-Static Polyethylene offers controlled, dissipation of electro-static charges emitted from other neighboring materials and personnel during handling, assembly, and shipment of the product. It contains internal anti-static agents designed to eliminate static-potential from the foam itself, and to dissipate electro-static discharges from other sources.

Flexible Foam Polyester Urethane is extremely easy to fabricate. It is used for display packaging, cushion packaging, acoustic applications, case inserts, medical applications, and gasketing applications. It can be formulated to meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) specifications.

Styrofoam® HL is an extruded Polystyrene foam used as insulation where high load-bearing is required. (Highload 40 - 60 - 100). It is a Type V extruded polystyrene foam insulation which resists compressive creep and fatigue, delivering long-term compressive strength and thermal performance in HL applications. Typical plank size is 2″ x 48″ x 96″ and is a blue material. It has a R-value of 10.

EthaFoam® is a resilient closed-cell foam construction. with outstanding recovery characteristics and ideal cushioning protection against impact. EthaFoam® protects products from a few pounds to hundreds. Dynamic cushioning performance in end caps, corner pads and load separators. EthaFoam® helps in blocking and bracing of delicate product. It is for products requiring a shock-absorbing, vibration dampening, insulation barrier and/or buoyancy component.

Trymer® is a rigid polyurethane foam which is ideal for insulating properties for plumbing, watercraft, and duct work insulation. It can also be used as a fibrous glass support material. This foam is a polyisocyanurate, so it may also be referred to as Rigid Urethane "ISO". It is one of the lowest ambient k-factors among all foam insulations (0.19 BTU in/hr ft2 °F at 75°F mean temperature (0.027 W/m °C at 24°C)). It can be used over a broad temperature range from -297°F to 300°F (-183°C to 148°C).

Flexible Foam Polyether Urethane is a lower density flexible urethane foam used in industrial packaging applications where higher loads are involved. It is a low cost, high resilient open cell flexible foam. It can be formulated to meet the MIL-PRF-26514, Cal-117, MVSS302, UL-94, and the FAR 25.853(a) specifications.

Expanded Polystyrene Foam (EPS) is a molded polystyrene foam used in packaging applications and also has insulation applications. It can be used for blocking and bracing for furniture and appliances. Expanded Polystyrene Foam has a very high compressive strength, and is very compatible with corrugated cardboard and flexible foams. It is commonly used to package and protect water heaters, dishwashers, and large appliances. It also provides impact protection for sensitive electronic equipment. It is used for applications that require protection from shock and vibration.

Filter Foam (Reticulated Foam) is an open-pore polyurethane foam ideal for air filters in air conditioners and I.C. engines, or ceramic filters. It can also be dipped or coated to perform other functions. Reticulation is a process by which the cell walls of the foam are removed leaving a skeletal structure behind. Filter or reticulated foam works as a depth-loading filter instead of a surface-loading filter.

MicroCell® is a chemically crosslinked polyolefin closed-cell foam available in 3" and 4" bun form with an extremely fine cell structure. It is easily skived to thinner thicknesses. This has taken the place of Voltek’s Minicel since it is no longer available in the U.S. Standard FMVSS-302 and Aviation F.A.R. 25.853 (A) vertical burn test.