Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Excellent flow properties which will eliminate brush marks
- Remains black to gray after drying
- Provides refractoriness up to 3000°F
- Protection at sand-metal interface provides a smooth casting finish
- Smooth, black to gray slurry is easily mixed with water to working Baumeᵒ
- Prevents burn on, burn in, metal penetration problems
- Anti-sag properties resist tearing on vertical sidewalls
- Excellent wetting power provides deep penetration into and behind sand surface. Core and mold surfaces should be free of oily deposits
- Low coefficient of expansion resists thermal shock
- Provides excellent sand peel and smooth casting finish under the most severe conditions
- Can be air dried, oven dried, or soft flame torch dried
- No shrinkage after drying
- Excellent shelf life does not deteriorate during storage
- EZ KOTE™ 65 Graphite application reduces cleaning room expenses
- Excellent freeze/thaw stability
- Quick clean up with soap and water
- For use with all core practices-no bakes, shell; hot box, cold box, oil and sodium silicate
- Provides excellent coverage for green and dry sand molds
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Mixing Information
The product is manufactured in a concentrated slurry. However, the product can be easily mixed to a thinner consistency by adding enough trim water to reach the desired Baumeoᵒ for an individual foundry. (Typically 39 baume) Minimal foam will result when the product is mixed in accordance with instructions. Use mechanical agitation for easy mixing. To assure quality performances use a vortex less mixer blade. Recommend frequent scheduled emptying of mixing vessels or storage tanks, followed by clean down, clear water rinsing to prevent contamination.
- Airless Sprayer Specification
Use 0.43 orifice airless sprayer.
Properties
- Physical Form
Packaging & Availability
- Packaging
- Drums
- Pails