Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Benefits
- Insures low maintenance costs to substrate.
- Provides an automotive equivalent finish.
- Enhances product image with a “wet look”.
- Extends service life between product refinishing.
- Highly flexible, stain, chemical and graffiti resistant.
- Product Highlights
Life-Kote is our Super Compliant Industrial Line. This series contains a complete offering of coatings designed for use on waste handling equipment, trailer components, structural steel, utility & power equipment, heavy machinery, propane tanks, automotive parts and by manufacturers using our pharmaceutical approach to innovative coating solutions. The Life-Kote system was developed as a result of tighter environmental VOC & HAPS regulations. Each coating is formulated to extend the life cycle of equipment, parts or machinery in the field while meeting cost, performance and application requirements.
Applications & Uses
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Recommended Uses
Applications include storage tanks, oil-field equipment, frac tanks, railcars, busses, trucks, heavy off-road equipment, farm machinery, tractor-trailers, horse trailers, business machines, furniture, plastics, and specialty industrial applications where a long lasting, high performance coating is required.
- Application
Surface Preparation - All substrates must be cleaned free of dust, dirt, oil (including form oils and parting compounds), grease, soap residue, wax, and flaking paint. For Severe conditions or heavily rusted steel:
- Steel: Sandblast: (SSPC-SP-6-63), Power Tool Clean (SSPC-SP-3) or wire brush (SSPC-SP-2) steel surfaces and prime (if severe-service extra corrosion protection is desired) with 98 Series Epoxy Primer or 92 Series Alkyd Primer. On chemically treated steel, no primer is required for interior application.
- Concrete: Sandblast or acid etch with muratic acid solution. Allow to dry before applying a thinned down primer coat. A moisture barrier should be in place to prevent water seepage.
- Application: May be applied by conventional, airless, air-assist airless, electrostatic, or HVLP spray only. Apply a light “tack coat”, let dry for 5-10 minutes, then apply wet coats until desires film thickness.
- Airless: Recommended tip size is .011 to .015 orifice at 1500 to 1800 psi with 100 mesh filters. Air Spray: Use industrial equipment such as a Graco 800 G-Gun with a .070 orifice fluid tip and a #04 air cap. The atomizing pressure should be 50-60 PSI with a pot pressure of 8 to 18 PSI.
- Air Assisted: Use .011 to .015 orifice at 300 to 500 PSI fluid and 10-20 PSI air pressure. HVLP: Use a Graco/ Croix Turbine Spray System with a .0551 gun tip or use a Graco HVLP Gun with a .055 tip. Contact you’re his Coatings Consultant for information on electrostatic spray.
- Reduction: Reduce as necessary for desired flow with MAK Solvent. If solvent pop or excessive orange peel defects are visible in the finish, then the coating needs reduced further until defects are not present.
- Flattening: Coating Gloss may be flattened further with the addition of H7170 Universal Flattening Agent. Add as needed up to 1 quart of flattening agent per gallon.
Properties
- Color
Safety & Health
- Environmental & Safety Statement
This product is not formulated with any lead, chrome or mercury containing ingredients. CAUTION! Keep away from heat and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist. Do not take internally. Close container after each use. Use only with adequate ventilation. Use respiratory devices and other personal protective equipment required by OSHA 29CFT 1910. KEEP OUT OF REACH OF CHILDREN.