Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Benefits
- VOC Compliant / HAPS Free
- Rust Inhibitive
- Corrosion Resistant
- Quick Drying/Fast Production Time
- Hi-Build Coating
- Excellent Adhesion and Flexibility
- “Barrier” Coating / Universal TTP-664 Primer
- Excellent re-coat time for wet on wet.
- Excellent enamel holdout with reduced strike in.
- Product Highlights
Life-Kote is our Super Compliant Industrial Line. This series contains a complete offering of coatings designed for use on waste handling equipment, trailer components, structural steel, utility & power equipment, heavy machinery, propane tanks, automotive parts and by manufacturers using our pharmaceutical approach to innovative coating solutions. The Life-Kote system was developed as a result of tighter environmental VOC & HAPS regulations. Each coating is formulated to extend the life cycle of equipment, parts or machinery in the field while meeting cost, performance and application requirements.
Applications & Uses
- Applications
- Application Area
- Application Method
- Recommended Uses
Substrates: Recommended for industrial applications such as original equipment, farm equipment, road building equipment, horse trailers, structural steel, tanks, metal containers, metal doors and casing, fencing, oil field machinery, and other metal surfaces.
- Surface Preparation
All substrates must be cleaned free of dust, dirt, oil (including form oils & parting compounds), grease, soap residue, wax, flaking paint, and any other contaminants. All burrs should be removed and sham edges or rough weld seams should be ground down. The substrate should be thoroughly degreased in accordance with SSPC-SPI. Solvent wipe and/or detergent clean surfaces before application. Sandblast or wire-brush surfaces to remove rust and mill scale. For optimum adhesion and corrosion resistance, metal should be iron or zinc phosphate treated.
- Application
- Mixing: Hand stir each container thoroughly before using and occasionally while applying. No thinning usually required. For thinning instructions, contact your local H-I-S sales representative. Reduce with aromatic solvent if necessary.
- Application: May be applied by air, airless, air-assisted airless, turbo or HVLP spray. Product may also be applied by dip or flow-coat. Recommended tip size for airless or air assisted airless spray: .011” to .013” (0.28-0.38 mm) orifice.
- Cleanup: Clean spills, spatters, hands, tools and other equipment promptly with lacquer thinner. Dispose of used paint and waste in accordance with local, state and federal regulations. Follow manufacturer’s safety recommendations when using lacquer thinner.
- Application Precautions & Limitations: Apply when surface, air and product are above 40oF (4oC) and at least 5oF (3oC) above the dew point. DFT Precautions: Do not exceed 4 mils DFT of primer when applying single component alkyd topcoat system without providing mechanical or grit abrasion to substrates that will exposed to sub zero climatic conditions.
Properties
- Color
Safety & Health
- Environmental & Safety Statement
This product is not formulated with any lead, chrome or mercury containing ingredients. CAUTION! Keep away from heat and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist. Do not take internally. Close container after each use. Use only with adequate ventilation. Use respiratory devices and other personal protective equipment required by OSHA 29CFT 1910. Keep out of reach of children.