Products

MoldX® P18 is for pultrusion, resin infusion, CIPP and vacuum bag molding applications. It's particle size distribution with top size particles of less than 18 microns gives superb processing performance at fiberglass contents greater than 50% by weight.

MoldX® S45 is engineered to allow higher loadings versus standard alumina trihydrate (ATH) products and offers excellent processing from 180 phr to as high as 240 phr.

MoldX® A400 is a third generation optimized Alumina Trihydrate (ATH) product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.MoldX® A400 optimized ATH is particularly well-suited for SMC, and it can also provide low cost flame retardancy and smoke suppression in other thermoset processes such as: epoxy potting, wet-mat, spray-up, hand lay-up, and bulk molding compounds (BMC) that contain reinforcing fibers (patent pending).

SB-332 ground ATH that provides low cost flame retardance and smoke suppression, and arc-track resistance. The medium-fine particle distribution yields desirable flow properties, good physical properties and suspension characteristics required in SMC/BMC compression molding and many rubber compounds. Applications utilizing SB-332 includes SMC/BMC electrical switch gear, appliance electrical sheet and office equipment housings along with epoxies, polishes, adhesives and coatings. A complete range of surface modifications is available to aid processing and enhance physical properties.These include silanes, stearates and wetting agents. .

SB-632 is a ground high whiteness Alumina Trihydrate (ATH) flame retardant with an average median particle size of 3.5 microns.SB-632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of SB-632 provides a low-cost approach to flame retardant and smoke suppression in applications such as urethane foam, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS,polyolefins and XLPE.

MoldX® A110 is a second generation optimized Alumina Trihydrate (ATH) product that gives improved processing viscosities at very high loadings from 250 phr to greater than 350 phr.MoldX® A110 can provide low cost flame retardancy and smoke suppression in a variety of other color sensitive thermoset processes such as: BMC, spray-up and hand lay-up, wet mat molding and epoxy potting