Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Applications
RELEASE FR 100 is designed for the production of PE adhesive tapes or films, which are supposed to be used in the refrigerator assemblage, to fix and protect the coils.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Total Solids | 99±1 | % | — |
Packaging & Availability
- Packaging Type
- Packaging and Storing
Packaging
The product is supplied in fiber drums (20 kg); fiber drums (50 kg).
Storing
RELEASE FR 100 solution gels at low temperatures and must be kept at 20°C or above. In case of freezing, good heating (50-60°C) and stirring will be necessary. Stirring must also be made every time before taking out partial quantities from containers. Use within 24 months from production date (unopened and in the original packaging).
Storage & Handling
- Shelf Life
- 24 Months
- Handling
RELEASE FR 100 has to be diluted at 5% in a blend of toluene - isopropyl alcohol as it follows:
- 85% toluene
- 10% IPA
- 5% Release FR 100.
Warm up to 40°C the blend of solvents with an undirect heating system (caution: highly flammable solvents) and add the Release FR100 slowly while stirring, till complete dissolution.
The solution of Release FR 100 can be applied on treated PE film by Mayer-bar, rotogravure or any other low viscosity coating system. The suggested coating weight is 1.5 -2.0 g dry /sqm. Temperature of product, before and during application, should never be below 35-40°C.