Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Applications
RELEASE K 100 S can be used on corona treated as well as on untreated films.
Concentration ranges from 0.3% solid to 2% solids, depending upon film, type, coating equipment and desired release force.
RELEASE K 100 S is soluble in aromatic and aliphatic solvents at temperatures above 35°C. In order to achieve a continuous and homogenous coating, the RELEASE K 100 S must be completely dissolved and the solution must be clear and homogeneous. If used in coextrusion process,
RELEASE K 100 S must be compounded at 4-5% to the polymer (PE or PP). This masterbatch has to be coextruded in a layer as thin as possible.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Total Solids | 99±1 | % | — |
| Melting Range | 75 - 85 | °C | — |
Storage & Handling
- Handling
Slowly add RELEASE K 100 S to the solvent and stir continuously at a temperature between 35 and 50°C till complete dissolution of the powder. Handle with care, since the solvent is flammable. Before coating, it is recommended to stir and heat the solution at 30°C at least.
- Storing
RELEASE K 100 S in 100% solid form can be stored safely at any temperature below its melting point. In solution, it must be stored at temperatures not below 25°C to prevent gelification. In case of partial or total solidification, store the product in a heated place and stir it well at a temperature between 35°C to 50°C before use. The product will return as fluid as before. Do not coat if liquid is not completely clear or if gelification occured.