Products

IKAMOD G2S4 is an impact modifier. Compared with AIM, it endows PVC products with much higher elongation rate at break and excellent glossness.

IKAMOD 105 is a special grafted copolymer designed to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. Compared to standard CPE and acrylic impact modifiers, it imparts much higher elongation at break and excellent toughness whilst maintaining outstanding impact resistance.

IKAFLOW 225 is an acrylic processing aid for improving the processing of PVC formulations.

IKAMOD 135A is a synthetic material, kind of thermoplastic elastomer, made from high density polyethylene (HDPE) and chlorine. This chlorinated polyethylene (CPE) material is designed as an additive to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. It has very good mechanical properties (elongation at break, tensile strength) and very good toughness.

IKA 5592C is used for window profiles or pipes depending on the used stabilizer. It is hard and brittle and is only mouldable with add on of plasticiser and stabilizers. Stabilizers make the processing of PVC possible and safe the finished product from changing through heat, ultraviolet light and oxygen.

IKAMOD 102S4 is a special grafted copolymer designed to improve the mechanical properties of opaque rigid PVC, suitable for both indoor and outdoor applications. Compared to standard CPE and acrylic impact modifiers, it imparts much higher elongation at break and excellent toughness whilst maintaining outstanding impact resistance.

IKAFLOW 277 is a lubricating acrylic processing aid with excellent hot metal release effect for improving the processing of PVC formulations.

IKAMOD 102 is a highly efficient impact modifier based on chlorinated polyethylene elastomer and acrylate chlorinated polyethylene elastomer.