Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Benefits of RC-1800 Silicone Roof Coating
- High-Solids
- One-coat application
- Lasting strength and flexibility
- Excellent flow and leveling
- Requires no mixing
- Can be applied by spray, roller or brush
- VOC compliant
- Can be recoated
- Withstands ponding water
Applications & Uses
- Markets
- Application Area
- Types of Applications
- Fasteners, flashings and gutters
- Metal buildings and roofs
- Modified bitumen and built-up roofs
- Polyurethane foam and concrete surfaces or roofs
- Single-ply roofs
- Industrial roofs
- PVC Roofs
- Recommended Uses
- RC 1800 was specifically developed as a protective coating for EPDM, TPO, PVC, modified bitumen, and smooth BUR.
- With excellent adhesion and durability, RC 1800 is proven to provide excellent UV protection and long term durability for spray polyurethane foam.
- Application Instructions
- RC 1800 may be applied by medium nap rollers, soft brushes or high-pressure airless spray equipment.
- Apply RC 1800 only to clean, dry, sound surfaces free of loose particles or other foreign matter.
- For best results, ambient temperature should be between 50 - 90 °F.
- Higher temperatures will shorten the cure time and working time for proper application of granules before the material has skinned.
- Lower temperatures will lengthen the skin over, tack-free and ultimate cure time.
- Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development.
- For best results, relative humidity should be above 20%.
- Lower humidity will slow the cure time significantly.
- Apply RC 1800 at the rate of 1.25 gallons per 100 sq. ft.
- Minimum dry mil thickness shall be above 20 mils.
- Two passes of silicone and a primer coat may be required for some applications and warranty programs.
- Product application should be suspended immediately and our technical service personnel contacted if the results being obtained are less than desirable.
- Limitations & Precautions
- Avoid moisture contamination in sealed containers.
- Store away from heat and sources of ignition.
- Do not inhale vapor or mist; do not get on skin, in eyes or on clothing.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Total Solids by Volume | 94 - 98 | % | ASTM D2697 |
Weight Per Gallon | 10.7 | lbs per gallon | — |
Flash Point | min. 160 | °F | — |
Viscosity | 8000 - 12000 | cPs | — |
Elongation | 199 - 299 | % | — |
Hardness | 45 - 55 | Shore A | — |
Tensile Strength | 275 - 375 | psi | — |
Permeance | 4.2 | perms | — |
Service Temperature | -50 to 200 | °F | — |
Solar Reflectance | 87.0 | % | — |
Thermal Emittance | 89.0 | % | — |
Cure Time | 2 - 8 | hours | — |
Tack Free | 1.0 | hours | — |
Skinover | 30.0 | minutes | — |
VOC | max. 100 | grams per liter | — |
Storage & Handling
- Shelf Life
12 months at 50 - 85 °F.