Inland Coatings

RC 1800 Silicone Roof Coating is a high solid, low VOC, one-part silicone elastomeric coating specifically designed for use in roofing applications as a protective coating over a variety of roofing substrates. Once cured this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, RC 1800 provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. RC 1800 provides excellent long-term protection through exceptional weather ability properties.

RC 1950 Polyurethane Sealant is a technologically advanced, high solids, single component moisture-cure polyurethane elastomeric sealant. In addition, RC 1950 is a brush-grade sealant and an excellent all-purpose sealer to address roof leaks on most roofing substrates. RC 1950 is produced in an aluminum gray color that allows for faster cure times than white sealants. Mil for mil, RC 1950 provides greater protection against leaks and water penetration than most sealants due to its tenacious adhesive properties, higher tensile strength and low vapor permeability values. RC 1950 offers a wider window of application than water-based acrylic sealants.

RC 1675 Acrylic Rust Inhibitor is a water-based rust inhibiting environmentally friendly roofing primer developed to be used on corroded metal substrates. This product can be applied as a primer coat for a variety of roof coatings. RC 1675 has excellent resistance to heat, cold, moisture and weathering. This primer also sets up quickly to allow the base coat of the desired elastomeric to be applied soon after application.

RC 2018 Rubber Top Coat provides excellent waterproofing and ultraviolet resistance. It is a one-component product that has excellent adhesion to properly prepared surfaces. It is thermally stable and resists cracking and peeling due to weather extremes. RC 2018 Rubber Top-coat can be applied over various base coats, including RC 2012B, RC 2013M, DF 1000 and DF 1050.

RC 2014T Rubber Top Coat is a rubber top-coat that provides excellent waterproofing and ultraviolet resistance. It is a one-component product that has excellent adhesion to properly prepared surfaces. It is thermally stable and resists cracking and peeling due to weather extremes. RC 2014T is the primary Top-coat for RC 2012B and RC 2013M rubber base coats.

RC 2000 Rubber Roof Coating is a unique rubber coating that provides extremely effective protection, reducing costly re-applications. It is a one-component product that has excellent adhesion to properly prepared surfaces. RC 2000 controls corrosion and rust bleed through, even after years of service. It is thermally stable and resists cracking and peeling due to weather extremes and ultraviolet exposure.

RC 1975 Polyurethane Aluminum is a technologically advanced, high solids, single component, moisture cure polyurethane elastomer coating uniquely formulated for the protection of low slope roofing systems including EPDM, TPO, PVC, Mod. Bit. and BUR surfaces. Once cured, this liquid-applied, moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, RC 1975 provides greater adhesion and increased protection than similar polyurethane coatings. This product also offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application than acrylic coatings.

RC 1600 Premium Acrylic Roof Coating is a high solids, technologically advanced, 100% acrylic elastomer uniquely formulated for the protection of metal, spray polyurethane foam and a wide variety of other sloped substrates. The proprietary formulation incorporates premium materials to produce a seamless, flexible, durable membrane having exceptional weatherability.

RC 1900 Aliphatic Polyurethane is a technologically advanced, high solids, single component, moisture cure, bright white polyurethane elastomer coating uniquely formulated as a finish coat over RC 1975 Polyurethane in low slope roof restoration projects. Once cured this liquid applied moisture-curing polymer provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Mil for mil, RC 1900 provides greater UV protection than similar aliphatic polyurethanes and offers increased resistance to moisture penetration through its lower moisture vapor permeability values. Due to its moisture-cure properties, a longer production window can be achieved during application versus water-based acrylic coatings.