Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Area
- Types of Applications
- TPO
- Hypalon
- EPDM
- Modified Bitumen
- BUR
- Urethane Foam
- Metal Roofing
- Surface Preparation
- The surface must be free of any oils, moisture, soil or other contaminants that may interfere with good adhesion.
- Remove any loose material from seams or other surfaces.
- Oil and grease should also be removed with solvents or an appropriate detergent cleaner, such as Inland RC 300.
- In many cases high-pressure water blast will be sufficient to prepare the surface.
- Application Temperatures
- For best results, the temperature of the ambient air and the substrate should be within a range of 50 - 100°F.
- For best spray application, the product should be at a minimum of 70°F.
- Lower temperatures can be utilized for brush applications.
- Application Methods
- RC 2018 can be applied by brush, spray or roller.
- Best results can be obtained with airless spray equipment.
- See inland application bulletins for additional information.
- Recommended Spray Equipment (Airless)
Tip Size 0.025" - 0.035" Fluid Pressure (psi) min. 3000 Fluid Hose Size 3/8" - 1/2"
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Coverage | 65 - 100 | sf/gal | — |
Flashpoint | 101.0 | °F | — |
Weight | 8.95 | lb./gal. | — |
Solids by Weight | 55 - 57 | % | — |
Viscosity (78°F) | 4800.0 | cPs | — |
Drying Time | 2 - 4 | hours | — |
Elongation | 400.0 | % | — |
Tensile Strength | 1200.0 | psi | — |
Storage & Handling
- Storage & Handling
- RC 2018 contains a blend of solvents that is considered combustible by D.O.T. and O.S.H.A. standards.
- It should be used and stored away from flames, in a well-ventilated atmosphere.
- Avoid prolonged breathing of vapors and prevent contact with eyes.
- Read all label information and precautions before using.