Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- Per its mix ratios, CFS01 Mortar is the most cost-effective mortar solution on the market.
- It is typically used to seal mechanical and electrical service penetrations, blank openings and other large annular spaces in the fire-resistance-rated wall and floor assemblies with ratings up to 3-hour assembly testing.
- CFS01 Mortar is non-shrinking, paintable, fast-drying, safe, simple to use, halogen and asbestos-free. Water and gas are impermeable, it offers excellent structural strength while still being re-penetrable and repairable.
- Meets the intent of LEED® VOC environmental air quality requirements.
Applications & Uses
- Markets
- Installation Guide
- Before applying, clean the surface of the opening and any penetrating items to allow for proper adhesion.
- Use mineral spirits or similar products to clean surfaces (Do not use alcohol).
- Ensure that the surface of the substrates is dry and frost-free.
- Install the correct depth and compression of backing material, if required, as detailed within the applicable Listed system.
- INSS2460 can be installed with a caulking gun, putty knife, or trowel. INSS2460+ can be applied by an airless sprayer.
- Install the applicable depth of INSS2460/INSS2460+ into the opening flush with the surface of the substrate, or as detailed within the Listed system to meet the required assembly rating.
- Tool the sealant surface smooth using a putty knife dipped in water making complete contact with substrates to ensure an air and smoke tight seal.
- Using mineral spirits, clean all tools and flush spray equipment immediately after use.
Properties
- Component A
- Component B
- Specifications
Value | Units | Test Method / Conditions | |
Mixing Ratio by Weight | 1.0 | — | — |
Value | Units | Test Method / Conditions | |
Mixing Ratio by Weight | 0.85 - 0.95 | — | — |
Value | Units | Test Method / Conditions | |
Yield (Per 20kg) | 22 - 25 | L | — |
Density (After Mixing) | 1400 - 1650 | kg/m³ | — |
Drying Time | 3 - 4 | hours | — |
Time to Remove Backer (if Required) | 2.0 | days | — |
Fully Cured | 28.0 | days | — |
Application Temperature | 40 - 104 | °F | — |
In-Service Temperature | -13 to 176 | °F | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Testing
- ASTM E 814 up to 3 hr F and T Rating
- UL 1479 3 hr F and T Rating: L Rating at Ambient - Less than 1 cfm/sq. ft.
- GB 23864
- CAN/ULC S-115 up to 3 hr FTH Rating: L Rating at Ambient - Less than 5.1 L/S/m²
Packaging & Availability
- Packaging
20Kgs/Bag
Storage & Handling
- Shelf Life
3 years, when stored indoors in dry conditions in original unopened packaging.