Products

Isopur UV STABILIZER offer UV stabilization in the following options as a pure UV stabilizer solution. It is added to the polyol component. The stabilizer solution can be added to both colored and non-colored systems in order to delay the yellowing process. As a UV-stabilizing color paste. It is added to the polyol component via the color paste. This procedure saves adding another component to the system. The prerequisite is that the dosage of the color paste is constant so that the same amount of stabilizer is added. A deviation from the correct addition amount of the stabilizer can lead to a serious loss of effectiveness.

Isothan® WB offers a tailor-made complete solution from a single source when it comes to coloring. ISOTHAN-WB lacquers comply with the latest guidelines for emission protection.

MOLTOPREN® pastes can be used in a wide variety of areas. In the polyurethane industry they are specially recommended for the universal coloring of block foam (esters and ethers). They are also used in PMMA sheet goods and PU adhesives.

Isothan® NT offers a tailor-made complete solution from a single source when it comes to coloring.

ISL: Moltopren® S reactive dyes for polyether- and polyester-based flexible polyurethane block foams.

Isopur series are based on different binders. The special adaptations are specifically developed and used for the respective PU system. The careful selection of organic and inorganic pigments with high fastness properties and resistance enables the entire color space to be covered. On request, we can develop further adaptations at any time, individually tailored to your process and system conditions.

Isocolor EP are very well tolerated in the epoxy systems. One of the reasons for this is the build-up on an epoxy resin as a carrier binder. Different epoxy resins are used depending on the area of ​​application and the associated requirements. The selected pigments meet the high demands of these industries in terms of light and weather fastness as well as temperature and chemical resistance.

Runacolor® WU is the range is characterized by the universal compatibility of the pigment preparations and consists of high-quality aqueous, solvent-free and solvent-containing pigment preparations for paints, adhesives, sealants and construction chemical products. RUNACOLOR -WU is for aqueous systems..

Isopur Optical Brightner/Stabilizer Blend with oxidation processes induced by light and / or heat lead to significant aging and destruction processes via a complex radical formation mechanism, especially with such open-cell and fine-pored structures as in flexible polyurethane foam. Yellowing and / or core discoloration up to material damage are the result.

Runacolor® LM is the range is characterized by special solutions, tailored to the respective binder and consists of high-quality, solvent-free pigment preparations for paints, adhesives, sealants and construction chemical products. RUNACOLOR -PU is for PU coatings and varnishes, cross-linking..