Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Vehicle Type
100% Crosslinking Acrylic
Features & Benefits
- Ready-to-Use Product Features
- Outstanding Features
- Highly durable: puncture- and tear-resistant without
- Up to 20-year warranties
- 2-inch hail-resistant warranties
- UV stable
- Environmentally Responsible Manufacturing: Manufactured with non-toxic materials, AcryLinkG and is packaged in lined drums to reduce waste.
- High solar reflectivity
- Easy-to-install and maintain
- Efficient: High solids formulation allows for applying more coating per pass
- 5 standard and stocked colors
- Custom colors available at no additional cost and no minimum quantity
- Unique crosslink properties - “Crosslinking:” the chemical reaction that occurs after the coating has dried on the surface. A catalyst causes a strong chemical bond to form internally at many points along each polymer chain, tying them all together into one, single gigantic molecule.
Applications & Uses
- Compatible Substrates & Surfaces
- Application
Clean surface and remove all loose debris. (Power washing is recommended). Apply base and topcoat in less than 1.5 gallons per 100 sq ft per pass.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Adhesion | Pass | - | ASTM D 3359 |
Chemical Resistance | Pass | - | ASTM D 1308 |
Cold Flex | Pass | - | ASTM C 711 |
Elongation | 360.0 | % | ASTM D 412 |
Elongation (90% Recovery) | 350.0 | % | ASTM D 412 |
Fire Resistance (FM) | Class A | - | ASTM E108 |
Fire Resistance (UL 790 Combustible Deck) | Class B | - | - |
Fire Resistance (UL 790 Non-Comb. Deck) | Class A | - | - |
Fungicide | 0.02 | % | - |
Hail Resistance (Factory Mutual) | Severe Hail Resistant | - | - |
Hardness | 57.0 | Shore A | ASTM D 2240 |
Near-Normal Infrared Emittance | 0.95 | - | ASTM E 408 |
Pigment/Vehicle Ratio | 1.5/1 | - | - |
Ponding Water Resistance | Excellent | - | - |
Service Temperature | -45 - 250 | °F | ASTM D 2137, D 794 |
Solar Reflectance | 79.0 | % | ASTM E 903 |
Solids (Volume) | 63.0 | % | - |
Solids (Weight) | 73.0 | % | - |
Tear Strength | 63.0 | lbs./inch | ASTM D 624 |
Tensile Strength | 304.0 | psi | ASTM D-412 |
Viscosity (Brookfield, 100 rpm) | 3000.0 | cps | - |
VOC | 16.2 | g/liter | - |
Water Adsorption (22hrs, 73°C) | 4.34 | % | ASTM D 471 |
Water Vapor Permeance (45 mils) | 2.21 | perms | ASTM E 96 |
Weathered Elongation | 76.0 | % | - |
Weathered Tensile Strength | 169.0 | % | - |
Weatherometer | 1000.0 | Hours | ASTM D 1499, G 23 |
Weight per Gallon | 11.43 | lbs. | - |
Technical Details & Test Data
- Technical Data
Utilizing CROSSLINKING chemistry and custom-engineered acrylic resins, AcryLinkG exhibits a combination of high tensile strength and elongation previously found only in some urethane coatings, while retaining the superior ultraviolet resistance and ease of application of acrylic coatings.
In addition to high tensile strength and elongation, the cured AcryLinkG membrane has excellent resistance to ponding water, fire and harsh chemical environments including acids, bases, industrial pollutants and hydrocarbons such as petrochemicals and animal fats.
Technologically advanced crosslinking acrylic resins, a superior coating formulation and competitive pricing combine to set AcryLinkG apart from all other coatings of any price range. With warranted applications over nearly every type of commercial and industrial exterior surface, AcryLinkG is as versatile as it is durable.
Safety & Health
- Precautions
- Optimum application window is when ambient temperature is above 45°F and relative humidity is below 85 percent.
- Do not apply to wet surfaces or when inclement weather is present.
- It is not recommended to apply coats in more than 1.5 gallons per 100 sq ft per pass.
- Do not apply when gross ponded water is present, the existing roofing system is suspected of holding moisture or the roof area does not shed water effectively.
Storage & Handling
- Maintenance
Damaged areas should be cleaned and free of loose debris. AcryLinkG, AcryCaulk™ or AcryPair™ should be applied.