Brands

FMG™ is an aluminum complex grease lubricant of the USDA Authorized H-1 type. It meets or exceeds the requirements of FDA Regulations and is specifically designed for use in the food processing industry where it may have incidental food contact. FMG has been formulated to perform in a wide variety of operating conditions. It is extremely water resistant and will remain in place even after frequent wash downs. Polymer additives provide adhesive/cohesive strength to protect against pound-off when shock loads are encountered.

EP BEARING GREASE™ is an all-purpose lithium grease containing naturally-occurring extreme-pressure and boundary lubricants. The additive package enhances the shear stability, lubrication properties and high temperature characteristics of lithium-based grease, making EP BEARING GREASE a versatile, cost-efficient, multi-purpose grease. The extreme pressure additive has the added benefit of reducing acidity created by oxidation of the base fluid and organic additives in high-temperature environments. The result is a stable, high temperature grease that will outperform most lithium soap based greases on the market today.

KILN GREASE HT™ is a premium lubricant formulated using a high viscosity, severely refined base oil. The base fluid combined with aluminum complex thickener produces a grease with exceptional high temperature, water resistance, and high load characteristics. The grease is ideal for use in kiln bearings, steel mills, pulp and paper mills, or in any severe service application where temperature, water washout and contamination, extreme loads or a combination of these factors are present.

JACKING SYSTEM GREASE ECF™ is safe to use in offshore applications since it is metal free and is formulated to conform to the strict North Sea Environmental Guidelines. It utilizes a water resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water wash off, wear, and corrosion. JET-LUBE JACKING SYSTEM GREASE ECF contains specially selected solid bounding lubricants to provide outstanding galling resistance and lubrication properties. The solid boundary additives synergistically combine to produce a superior lubricating film with high-load and low-wear characteristics. The base oil blend of this product is of lower viscosity than most multipurpose greases allowing it greater potential for bio degradation and contains additional anti-wear, anti rust, and antioxidant additives.

DEACON PFPE GREASE is a PTFE thickened perfluorinated polyether fluid providing optimum oxidation resistance at temperatures up to 500ºF. This combination of materials has the additional benefit of being essentially inert to all but a couple of fluorinated, higher molecular weight solvents. The base fluid carries exceptionally high extreme pressure properties with a 4-Ball Weld Point of 800 - 1000 kilograms of force. It must be cautioned, however, that base oil viscosity is the critical parameter in long term bearing protection and performance.

CC LUBE™ is a state-of-the-art, semi-synthetic, multi-purpose lubricant that combines an aluminum complex thickener for extreme water resistance with the latest synthetic ingredients and PTFE to create a transparent, long-lasting, high lubricity lubricant of quality and performance.

CB-2™ is an all-purpose, high temperature, lithium 12- hydroxystearate soap grease. Its buttery consistency makes it highly adhesive to metal and it has exceptional mechanical stability. CB-2 is standard in a NLGI 2 grade grease that will accommodate nearly all requirements for a “multipurpose” grease type lubricant. It is also available in other NLGI grades making CB-2 a truly versatile product.

AP-5™ is a formulated from bentone clay, AP-5™ is noted for its high temperature insensitivity, is non-melting and does not thicken excessively at temperatures as low as 0°F (-18°C). It has mechanical stability, is water resistant, displays high stability on working, has excellent adhesion to metals, prevents wear and has superior storage life.

ARCTIC™ is an excellent service grease that has passed the Shell Roll Test for 100 hours at 150°F (66°C), and passed Federal Test Method Standard No. 791B, Method No. 3454.2 “Leakage Tendencies of Automotive Wheel Bearing Greases” and ASTM 1263. ARCTIC™ is an anhydrous, calcium 12 hydroxystearate grease with a dropping point of 285°F (141°C). It has an amber color and contains no solid additives such as graphite, moly disulfide, or zinc oxide. It also passes the application salt-spray-resistance and rust tests required by the United States Government for its severe environmental contact greases.

#202 MOLY-LITH™ is a black, thermally stable, lithium 12-hydroxystearate soap grease containing microfine molybdenum disulfide (MoS2), antioxidants & rust inhibitors. #202 MOLY- LITH has a dropping point of 390°F (199°C), is water resistant and displays excellent work stability under high loads, high speeds, shock and vibration. Sub-micron particles of Molybdenum Disulfide, blended into the superior lubricating grease base, contribute to the good load carrying and low friction characteristics.

JET-PLEX-EP™ Lithium Complex Grease is the ideal multipurpose grease for use in extreme pressure and high temperature operating conditions. It is the top of the line product for severe applications and general purpose lubricant.

ALCO-EP™ ECF™ is a premium, state-of-the-art, multipurpose complex grease thickening a blend of synthetic and vegetable oils selected to provide the level of biodegradation required to meet the Norwegian “Yellow” and the combined UK and Netherlands “E” categories. These are the safest environmental ratings for lubricating grease. The non-plating, organic EP/antiwear additives allow ALCO-EP ECF to be used where tolerances are low and/or speeds are high.

AP-1™ is a Formulated from bentone clay, AP-1™ is noted for its high temperature insensitivity, is non-melting and does not thicken excessively at temperatures as low as 0°F (-18°C). It has mechanical stability, is water resistant, displays high stability on working, has excellent adhesion to metals, pre-vents wear and has superior storage life.

AP-1W™ is a formulated from bentone clay, AP-1W™ is noted for its high temperature insensitivity, is non melting and does not thicken excessively at temperatures as low as -20°F (-29°C). It has mechanical stability, is water resistant, displays high stability on working, has excellent adhesion to metals, prevents wear and has superior storage life.