Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
ALCO-EP ECF also contains polymer additives, further enhancing the inherent water resistance of complex based grease. ALCO-EP ECF is extremely resistant to rust and corrosion and is ideally suited for use in high moisture areas, including subsea applications.
• Excellent elastomer compatibility
• Superior rust and corrosion protection for maximum service life under harsh conditions
• Polymer additives for extreme water resistance
• Biodegradable
• Exceeds Military specification MIL-G-18458B-SH
• Approved for use on squnch & RL-4 and other similar oilfield connections.
This product is formulated to contain no detectable, leachable, volatile organics by EPA Test Method 1311- TCLP number SW846 8260B as determined by independent, 3rd party testing.- Benefits
- Non-plating, organic EP / Anti-wear additives.
- Contains polymer additives.
- Water-resistant.
- Superior rust & corrosion protection.
- Biodegradable.
Applications & Uses
- Markets
- Applications
Specially formulated and developed for subsea or other conditions where extreme water resistance is necessary. Highly developed additive package makes ALCO-EP ECF the premier, multipurpose grease for hostile environments. Ideal for certain RISER, WASH PIPE and other proprietary connection designs.
Properties
- Appearance
- Synthetic, Vegetable Oils
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Additive Type | EP/AW, R&O | — | — |
| Approximate Safe DN Limit | 400000.0 | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 8.0 | Ib./gal | — |
| Dropping Point | min. 500 | °F | ASTM D-566 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | Lubricating Oil | — | — |
| NLGI Grade | 2.0 | — | — |
| Operating Temperature | -10 - 450 | °F | — |
| Oxidation Resistance (PSI Drop, 100 Hrs) | max. 5 | — | ASTM D-942 |
| Penetration (77°F) | 265 - 295 | — | ASTM D-217 |
| Specific Gravity | 0.96 | — | — |
| Thickener | Complex | — | — |
| US Steel Mobility (-10°F) | 16.0 | g/min | — |
| Wear Scar Diameter | 0.7 | — | ASTM D-2266 |
Regulatory & Compliance
- Certifications
ALCO EP ECF carries EU certification/registrations.
- Eco-Certified
- Environmental Rating: UK CEFAS OCNS Group E
- MIL-G-18458B-SH
- EU certification/registrations:
- Norway - Yellow
- Netherlands & UK:E
- Denmark PR#: 2324093