Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. JET-LUBE’s AP-5 is recommended for anti-friction bearings, ball and roller bearings, sleeve bearings, journals, shackles, slides, conveyor chains, U-joints, sealed assemblies, chassis and general lubrication.
• Protects against rust and corrosion
• Prevents wear
• Highly adhesive to metal
• Resistant to water
• Superior storage life- Benefits
- Rust & corrosion protection.
- Non-melting.
- No Dropping Point.
- Superior storage life.
- Highly adhesive to metal.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Applications
JET-LUBE´s AP-5 is a black, smooth, non-melting, water resistant grease. It contains molybdenum disulfide (MoS2) to yield high film strength with low coefficient of friction. Resists fretting corrosion. Suitable for use in plain and anti-friction ball and roller bearings. Provides heavy-duty protection for such heavy-industry equipment as kiln bearings, crushers, crane
ladles, press and hammer guides and lift-bridge pin bearings. AP-5 is recommended for high temperature blowers, fans and oven conveyors. It is also approved for certain oilfield
connection lubrication.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
4-Ball Weld Point | 250.0 | kgf | ASTM D-2596 |
Additive Type | Organic, MoS2 | - | - |
Autoignition Point (Calculated) | min. 680 | °F | - |
Copper Strip Corrosion | 1A | - | ASTM D-4048 |
Density | 7.7 | Ib./gal | - |
Flash Point | min. 560 | °F | ASTM D-92 |
Fluid Type | Lubricating Oil | - | - |
Load Wear Index | 40.0 | - | - |
NLGI Grade | 2.0 | - | - |
Operating Temperature | 0 - 550 | °F | - |
Oxidation Resistance (Base Oil Viscosity, 40°C) | 414 - 506 | cSt | ASTM D-445 |
Oxidation Resistance (PSI Drop, 100 Hrs) | max. 5 | - | ASTM D-942 |
Penetration (77°F) | 265 - 295 | - | ASTM D-217 |
Specific Gravity | 0.92 | - | - |
Thickener | Organo Clay | - | - |
Wear Scar Diameter | 0.7 | - | ASTM D-2266 |