Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
CC LUBE is clear, clean, colorless, non-staining, nondrying, biodegradable and unsurpassed in reducing friction, extending machine and equipment life and preventing the formation of rust and corrosion over a broad temperature range of 0°F (-18°C) to 400°F (204°C). CC LUBE is NSF (H-1) Registered for use in Federally Inspected Meat and Poultry Plants.
• Nontoxic, Non-staining
• Clear, Clean Lubricant
• Nondrying Formula
• Colorless/Odorless
• Contains PTFE
• Biodegradable
• Reduces Friction
• Available in Other Grades- Benefits
- NSF H-1 Registered.
- Excellent work stability under high loads.
- Highly water-resistant.
- Rust & corrosion inhibitors.
- High strength fluid film.
- Pumpable.
- Timken load - 45 lbs.
- Multipurpose.
Applications & Uses
- Markets
- Application Area
- Compatible Substrates & Surfaces
- Applications
May be safely used on a variety of food processing equipment. CC LUBE is designed to eliminate hot water wash-out and has anti-bacterial additives to eliminate bacterial culturing. It may be used safely on a variety of surfaces including metal, plastic, rubber (Viton, neoprene, Buna & HSN), vinyl, stainless steel and nylon. CC LUBE is an ideal lubricant for roller, pillow block, needle and plain bearings that are used in cooking, processing and packaging of food products. It is a clear lubricant and will not stain cotton, polyester or Mylar fabrics.
- Bearings: Conveyors
- Bushings: Bottling equipment
- Gears: Belting for baking ovens
- Valves: Food processing machinery
Properties
- Appearance
- Clear
- Typical Properties
| Value | Units | Test Method / Conditions | |
| 4-Ball Weld Point | 126.0 | kgf | ASTM D-2596 |
| Additive Type | Organic, R&O, PTFE | - | - |
| Autoignition Point (Calculated) | min. 500 | °F | - |
| Copper Strip Corrosion | 1A | - | ASTM D-4048 |
| Density | 7.3 | Ib./gal | - |
| Dropping Point | 390.0 | °F | ASTM D-566 |
| Dropping Point | 500.0 | °F | ASTM D-566 |
| Flash Point | min. 450 | °F | ASTM D-92 |
| Fluid Type | White Oils, Synthetics | - | - |
| Load Wear Index | 25.0 | - | - |
| NLGI Grade | 1 - 1 ½ | - | - |
| Oxidation Resistance (Base Oil Viscosity, 100°C) | 14.3 | cSt | ASTM D-445 |
| Oxidation Resistance (Base Oil Viscosity, 40°C) | 100 - 150 | cSt | ASTM D-445 |
| Oxidation Resistance (PSI Drop, 100 Hrs) | max. 5 | - | ASTM D-942 |
| Penetration (77°F) | 285 - 315 | - | ASTM D-217 |
| Specific Gravity | 0.88 | - | - |
| Thickener | Aluminum Complex | - | - |
| Wear Scar Diameter | 0.7 | - | ASTM D-2266 |
Regulatory & Compliance
- Certifications & Compliance