Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
FMG can be used in a wide range of temperatures from 0°F (- 18°C) to over 400°F (204°C). It is recommended for the lubrication of roller, needle, ball, journal, and sliding bearings in the food processing and handling industry.
- Features
- Aluminum Complex Grease.
- Polymer Additives.
- Non-Pound Out Formula.
- Bacteriostatic Agent.
- Anti-Wear Additives.
- Benefits
- Extremely Water Resistant.
- Adhesive/Cohesive Strength.
- Reduced Lube Consumption.
- Retards Bacteria/Fungus Growth.
Applications & Uses
- Markets
- Application Area
Properties
- Appearance
- White Grease
- Typical Properties
| Value | Units | Test Method / Conditions | |
| 4-Ball Weld Point | 400 - 500 | kgf | ASTM D-2596 |
| Additive Type | Zinc Sulfide, Organic, R&O | - | - |
| Autoignition Point (Calculated) | min. 500 | °F | - |
| Copper Strip Corrosion | 1A | - | ASTM D-4048 |
| Density | 7.8 | Ib./gal | - |
| Dropping Point | min. 500 | °F | ASTM D-566 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | White Oils, Synthetic | - | - |
| Load Wear Index | 50.0 | - | - |
| NLGI Grade | 2.0 | - | - |
| Operating Temperature | 0 - 400 | °F | - |
| Oxidation Resistance (Base Oil Viscosity, 40°C) | 90 - 110 | cSt | ASTM D-445 |
| Oxidation Resistance (PSI Drop, 100 Hrs) | max. 5 | - | ASTM D-942 |
| Penetration (77°F) | 265 - 295 | - | ASTM D-217 |
| Specific Gravity | 0.94 | - | - |
| Thickener | Aluminum Complex | - | - |
| Wear Scar Diameter | 0.7 | - | ASTM D-2266 |
Regulatory & Compliance
- Certifications & Compliance
- Certifications
- NSF H1 Registered #048225 (NLGI 1), #048226 (NLGI 2), #131548 (NLGI 3)
- Conforms to FDA Regulations CFR 21 Section 178.3570 for Incidental Food Contact