Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
JET-PLEX-EP is manufactured from carefully selected petroleum oils and lithium complex soap to create a multipurpose grease with a dropping point of 550°F (288°C). It has a smooth texture with a heavy body consistency, but provides good pumpability in both hot and cold operating temperatures. JET-PLEX-EP has excellent resistance to water and water washout problems. Oil separation is minimal even under extreme pressure. Heat cycling pro- duces only a minor change in consistency. JET-PLEX- EP is formulated with special lubricity, anti-wear, and ex- treme pressure additives and fortified with rust, corrosion and oxidation inhibitors.
- Lithium complex base
- Excellent for high temperatures, high load applications - will not run or pound out
- NLGI GCLB
- Extremely resistant to rust and oxidation.
Applications & Uses
- Applications
- Applications
JET-PLEX-EP is recommended for all types of bearing and sliding applications, for shock-loading, pounding, rough chassis usage and high loads. JET-PLEX-EP is the multipurpose lubricant that can replace several conventional type greases, resulting in smaller required inventories and less chance of misapplication.
Properties
- Appearance
- Red
- Typical Properties
| Value | Units | Test Method / Conditions | |
| 4 Ball Weld Point | 315.0 | — | ASTM D-2596 |
| Additive Type | Organic EP/AW, R&O | — | — |
| Approximate Safe DN Limit | 50 - 100000 | — | — |
| Autoignition Point (Calculated) | min. 500 | °F | — |
| Base Oil Viscosity (40°C) | 680.0 | cSt | ASTM D-445 |
| Copper Strip Corrosion | 1A | — | ASTM D-4048 |
| Density | 7.6 | lbs./gal | — |
| Dropping Point | min. 550 | °F | ASTM D-2265 |
| Flash Point | min. 430 | °F | ASTM D-92 |
| Fluid Type | Petroleum Oil | — | — |
| Load Wear Index | 50.0 | — | ASTM D-2596 |
| NLGI Grade | 2.0 | — | — |
| Oxidation Resistance (PSI Drop, 100 Hrs) | max. 3 | — | ASTM D-942 |
| Specific Gravity | 0.91 | — | — |
| Thickener | Lithium Complex | — | — |
| Wear Scar Diameter | 0.45 | — | ASTM D-2266 |