Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Thickener Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
The aluminum complex thickener utilized in KILN GREASE HT was selected for its excellent stability, temperature and water resistance. The thickener, combined with friction reducing polymers and boundary lubricants, aids in forming a stronger seal against the intrusion of water and waterborne contaminants helping to extend the useful life of the grease while increasing the lubrication properties. The high viscosity base fluid helps in giving the grease its high temperature and EP characteristics. The result is a nonclay grease with a dropping point above 540°F and 500 kgf weld point, KILN GREASE HT is less volatile and oxidizes slower than conventional petroleum oil greases, and does not tend to cross link and rubberize like silicone based systems. This allows the grease to be used at elevated temperatures and high loads with reduced greasing intervals.
- Extremely resistant to heat & oxidation.
- Resists wear.
- Smooth texture.
- Protects against high loads, shock, welding and scoring.
- Extends maintenance intervals.
- Benefits
- Has a dropping point of >450°F.
- Excellent work stability under high loads.
- Highly water-resistant.
- Fortified with rust corrosion inhibitors.
- High strength fluid film.
- High aluminum complex soap content >10%.
- Pumpable.
Applications & Uses
- Markets
- Application Area
- Applications
For grease lubricated roll neck bearings on blooming, billet, slabbing, bar, plate and other mills in the steel industry. Ideal for low speed, plain bearing and sliding surface applications operating under marginal or boundary lubrication conditions; as well as backup or work-roll and table bearings and ball, roller and plain bearings. Also excellent for high temperature applications such as oven fan motor bearings, furnace car wheel bearings, annealing furnaces, drying ovens, sintering plants, kilns and soaking pits. Exceptional for use in paper mill bearings operating under wet and/or hot conditions.
Properties
- Appearance
- Green
- Typical Properties
| Value | Units | Test Method / Conditions | |
| 4-Ball Weld Point | 500.0 | kgf | ASTM D-2596 |
| Additive Type | Solids, PTFE | - | - |
| Autoignition Point (Calculated) | min. 615 | °F | - |
| Copper Strip Corrosion | 1A | - | ASTM D-4048 |
| Density | 7.8 | lbs./gal | - |
| Dropping Point | min. 542 | °F | ASTM D-566 |
| Flash Point | min. 560 | °F | ASTM D-92 |
| Fluid Type | Petroleum Oil | - | - |
| Load Wear Index | 80.0 | - | - |
| NLGI Grade | 2.0 | - | - |
| Oxidation Resistance (Base Oil Viscosity, 40°C) | 460.0 | cSt | ASTM D-445 |
| Oxidation Resistance (PSI Drop, 200 Hrs) | max. 5 | - | ASTM D-942 |
| Penetration (77°F) | 265 - 295 | - | ASTM D-217 |
| Service Rating | 0 - 500 | °F | - |
| Specific Gravity | 0.94 | - | - |
| Thickener | Aluminum Complex | - | - |
| Wear Scar Diameter | 0.6 | - | ASTM D-2266 |
Packaging & Availability
- Packaging
Code No. Container Size Container 75150 14 oz Cartridge 75116 35 lb Pail 75124 120 lb. Drum 75129 400 lb. Drum