Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Properties
- Medium viscosity and high reactivity
- Compatible with various hardeners, reactive diluents and accelerators
- Low hydrolysable chlorine content and therefore slight tendancy to cristalization at low temperature.
- Confirms to FDA listing
The resins formulated yeild:
- Superior mechanical and electrical properties
- Execllent chemical and water resistance
Applications & Uses
- Applications
- Coating Type
- Application
Due to its extremely low hydrolyzable chlorine (max 200 ppm) content Araldite® GY 6010 CSR is also a special resin for electrodeposition (cataphoritic) primers mainly used in the automotive industry.
Properties
- Physical Form
- Appearance
- Clear, No Contamination
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Color (APHA) | max. 100 | — | ASTM D-1209 |
| Epoxy Value | 5.32 - 5.49 | eq/Kg | ASTM D-1652 |
| Weight per Epoxide | 182 - 188 | g/eq | ASTM D-1652 |
| Viscosity at 25°C (77°F) | 10,000 - 12,000 | mPa.s | ISO 12058-1 |
| Hydrolyzable Chlorine | max. 200 | ppm | JCTM 195 |
| Water Content (KF) | max. 0.08 | % | ASTM D-4017 |
| Residual Epichlorohydrine | max. 10.0 | ppm | JCTM GC6010 |
| Density at 25°C | 1.16 | g/cm3 | ISO 1675 |
| Flash Point (closed cup) | min. 200 | °C | ISO 2719 |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Hazardous Decomposition Products
When disposed of in fire
Carbon monoxide, carbon dioxide and other toxic gasses and vapors.
Disposal
- Regular procedures approved
- Handling Precautions
- Warning: Causes irritation.
- May cause allergic skin reaction.
- Avoid contact with eyes, skin or clothing.
- Avoid breathing vapor, mist or spray.
- Use with adequate ventilation.
- Promptly remove wet, contaminated clothing and wash before reuse.
- Wash after handling.
- Store in a cool, dry area in closed containers
Packaging & Availability
- Packaging Type
Storage & Handling
- Shelf life (at storage temperature between 10-50°C)
- 6 years
- Storage
Araldite® GY 6010 CSR is supplied in bulk and in 240 kg. steel drums.
- Storage
This product has a minimum shelf life of four years when stored in unopened sealed containers in a dry location at room temperature. Like most liquid epoxy resins, Araldite 6010 CSR may crystallize when stored below room temperature. Heating the resin to 60-70°C (140- 160°F), for several hours will re-liquefy it and restore its original properties.