Kel-Crete Industries

Kel-Crete Premium Super Dry Admixture is a non-toxic admixture that is blended to provide water reducing, plasticizing, air entraining and gelling functions for the manufacture of pre-blended products for the plaster, masonry, shotcrete, concrete, etcetera industries. Normally the recommended amount to use is one ounce by weight per 100 pounds of portland cement/fly ash products. It meets EPA Leeds and Carbon Footprinting standards.

Tuff-Kote is a non-toxic, blended, non-shrink mortar using KelCrete Premium Super Dry Admixture and a special blend of polymers and low alkali portland cement. Fibers are added for one-coat and patch specifications. Tuff-Kote is highly resistant to water penetration, cracking, movement, etcetera. It comes with a 15-year product warranty when used in accordance with the Tuff-Kote Flex/Kel-Prime Plaster System. Tuff-Kote meets EPA Leeds and Carbon Footprinting standards. Tuff-Kote Flex 10,000 is a high-end special formulation that provides maximum benefits. It should only be considered by residential or commercial owners and their architects who are more interested in longevity than material costs. It is flexible and will greatly resist movement of buildings, and gives high psi values.

Kel-Prime is a non-toxic sealing, bonding, curing and hardening agent. As a sealant it provides water retention for proper curing/hydration. As a bonding agent it provides excellent bonding for plaster over CMU units, and greatly reduces rebound. As a curing agent it "will cure the plaster in 24 hours". It helps the curing process in shotcrete, concrete, etcetera CMU units. Kel-Prime will harden a soft plaster wall in 24 hours. Kel-Prime meets EPA Leeds and Carbon Footprinting standards, and is non-toxic and made in the USA.

Kel-Crete Premium Liquid Admixture is a non-toxic admixture that provides water reducing, plasticizing, air entraining and gelling functions for the plaster, stucco, shotcrete, masonry, concrete etcetera mortar industries. Except for shotcrete and concrete, the Kel-Crete is normally induced at the job site. It is a replacement to hydrated lime and silica fume. Kel-Crete meets EPA Leeds and Carbon Footprinting standards. For more than 50 years Kel-Crete Premium Liquid Admixture has been a leader in the plaster, masonry, shotcrete, concrete, etc, admixture industries. Independent laboratory test reports Kel-Crete Premium Liquid Admixture meets 2012 IBC codes and ASTM C-926.