Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Features
Antitack BTO-15 is very economical to use. At rubber companies producing technical rubber parts by using all kinds of polymers and rubber compounds with different hardness, a dilution ratio of 1:20 (5 %) has been tested successfully, however, it is recommended to control the concentration of the antitack bath continuously. The minimum dilution rate should be 1:15. If the dosage of the antitack agent is higher than 1:15 the water-soluble polymers might create a thick layer on the batches, reversing the release effect and
causing stickiness.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Dosage
If the dosage of the antitack agent is higher than 1:15 the water-soluble polymers might create a thick layer on the batches, reversing the release effect and causing stickiness. Due to the conductivity of the Antitack BTO-15 concentrate, the dilution ratio can be controlled by a con-ductivity meter. For further information please contact us.
Properties
- Physical Form
- Appearance
- opaque, viscous liquid
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density at 20 °C | approx. 1.05 (mathematically) | — | — |
| pH Value (20 °C, Dilution Ratio 1 + 10) | 6 - 8 | — | — |
| Dry Matter (0.5 g/15 min./109 °C) | 23.5 ± 2.5 | % | — |
Packaging & Availability
- Packaging
plastic drums containing 100 kg net
Storage & Handling
- Storage
2 years at room temperature in originally sealed drums