Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Dosage
For compounds based on chloroprene, low dosages (≤ 1 phr) are generally sufficient because Media-plast AT is very effective within this polymer. A dosage of about 0.5 phr is recommended for sticky EPDM compounds with a high plasticizer content. The dosage for polar polymers should be 1–3 phr depending on the stickiness of the compound. The dosage for polar polymers should be 1–3 phr depending on the stickiness of the compound
- Uses
In ACM and VAMAC compounds, tests have shown a significant improvement of rubber compound flow, whereas physical properties (e. g. compression set) are only slightly influenced. Mediaplast AT is based on highly effective polar substances. Therefore it should only be used in small amounts (max. 1 phr) with low polarity polymers.
Properties
- Physical Form
- Appearance
- beige pastilles
- Physical Properties
Value | Units | Test Method / Conditions | |
Density at 20 °C | approx. 0.84 (mathematically) | g/cm³ | — |
Bulk Density | approx. 0.5 | g/ml | — |
Ash Content (1 h, 950 °C) | max.1 | % | — |
Flash Point | above 200 | °C | — |
Melting Point | 53 ± 5 | °C | — |
Packaging & Availability
- Packaging
paper bags containing 20 kg net
Storage & Handling
- Storage
3 years under suitable storage conditions