Products

Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.

Neutral Calcium Sulfonates Syncal™ N45H is dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process.

PIBSI 1060A is a polyisobutylene succinicimide produced from polyisobutylene anhydride and a high molecular weight amine. This quality product is manufactured by thermal process to render a chlorine-free PIBSI.

Overbased Magnesium Sulfonate Magsul™ OB9A is a cost efficient overbased magnesium sulfonate that lends detergent/dispersant, acid neutralizing, rust and corrosion inhibiting characteristics to a variety of lubricants. Magsul™ OB9A is a good choice for automotive, marine, diesel and stationary diesel lubricants. Nominal dosages ranging from 0.25% to 5.0% (Wt.) in the finished lubricant are effective. Magnesium sulfonates contribute lower ash to formulated products than the traditional overbased calcium sulfonate counterparts. This product exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

Neutral Calcium Sulfonates Syncal™ N45H, 45LC, and N70H are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

Synstock™ HV40X and HV100X polyalphaolefins are high viscosity API Group IV synthetic base stocks. They are decene derived, hydrogenated oligomers made by catalytic polymerization of linear alphaolefins. These Synstock™ products meet the requirements for technical white oil and are listed in the NSF White Book as Category Code H1. Benefits from choosing Synstock™ Group IV base oils over other options include good hydrolytic and thermal stability, very low pour points, and low volatility.

Syncal™ OB308 is a specialty overbased calcium sulfonate that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricating oils, greases, rust preventives, and metalworking fluids. Syncal™ OB308 is a good choice for passenger car, heavy duty diesel, marine and stationary diesel engine oils where good detergency is required. Overbased calcium sulfonate grease manufactured from Syncal™ OB308 will convert readily and exhibit good gel strength retention properties. This product is compatible with most mineral base oils, white oils, and synthetic base stocks.

Syncal™ OB411 is an economical overbased calcium sulfonate that will lend detergent/dispersant, acid neutralizing, and rust and corrosion inhibiting characteristics to a variety of lubricating oils and greases, rust preventives and metalworking fluids. Nominal dosages would range from 0.50 to 5.0% (Wt.) of the finished lubricant. This product is compatible with most mineral base oils, white oils, and synthetic base stocks and is a good choice for crankcase applications.

PIBSI 70PAO is a polyisobutylene succinicimide produced from polyisobutylene anhydride and a high molecular weight amine. This quality product is manufactured by thermal process to render a chlorine-free product.

Syncal™ OB403 and OB408 are multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB403 or OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

Synstock™ HV40X and HV100X polyalphaolefins are high viscosity API Group IV synthetic base stocks. They are decene derived, hydrogenated oligomers made by catalytic polymerization of linear alphaolefins. These Synstock™ products meet the requirements for technical white oil and are listed in the NSF White Book as Category Code H1. Benefits from choosing Synstock™ Group IV base oils over other options include good hydrolytic and thermal stability, very low pour points, and low volatility.

Neutral Calcium Sulfonates Syncal™ 45LC are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

Syncal™ OB408 is multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB408 tend to convert readily and exhibit outstanding gel strength retention properties.