Products

King Honor International KH FT WAX 80 is the medium-melt Fischer-Tropsch synthetic wax. It is specially designed to meet the above two requirements by adhesives producers. It has narrow melt range and the high onset of melt, which can balance strength and flexibility, performing excellently in hot melt adhesives.

King Honor International Micronized Water-Base Wax have affinity for water-based system and is suitable for various water-based and ink and coating It can be used for water-based ink varnish and waterborne coatings. Provide anti-adhesion, anti-scratch, anti-fouling and anti-friction effects, while providing a smooth and soft feel and better hydrophobicity and sealing. In different systems, the dosage is generally 0.5% ~ 3%. Applied in water-based inks and paints.

King Honor International Micronized Solvent-Base Wax KH PEW-0205B is suitable for solvent flexographic inks and solvent gravure inks. It can greatly improve the wear resistance of solvent-based inks, reduce the friction coefficient of inks. It has good adaptability to benzene-soluble inks, alcohol-soluble inks, and ester-soluble inks. To improve the wear resistance and scratch resistance of various surface coatings. In different systems, the dosage is generally 0.5% ~ 3%.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

King Honor International KH Paraffin Wax 80N/L/H is having high melting point and fine crystalline structure.

King Honor International KH Paraffin wax 80M is a light color and congealing point ranges from 80-85℃(176-185 F). It’s produced from the dewaxing of base oil in the refinery process. By the deep refinery, it has the fine microcrystalline structure, meanwhile has a small part of the linear structure as paraffin wax. It has the good capability with paraffin wax and applied well in rubber protective wax. With the development of our technology, our categories of microcrystalline waxes are kept abundant.