Products

King Honor International KH FT WAX 80 is the medium-melt Fischer-Tropsch synthetic wax. It is specially designed to meet the above two requirements by adhesives producers. It has narrow melt range and the high onset of melt, which can balance strength and flexibility, performing excellently in hot melt adhesives.

King Honor International KH Paraffin Wax 67H is made from the deep refinement. Comparing the general fully refined paraffin wax, it has the more narrow carbon distribution. There is a more linear structure. That endows it with many good characteristics while using in the high-grade hot melt adhesives. It has the fast setting time, good cohesive strength and has good compatibility with the major groups of polymers. This grade is specially produced for the customer who uses it in the hot melt for packages. And we could help the customer with a slight adjustment to fulfill their own production process.

King Honor International KH FT WAX 120 is the coal-based Fischer-Tropsch wax. It has a higher melting point and the lower penetration. KH FT wax 120 is suitable to be used in road marking paints. Presently, the thermoplastic traffic marking paint is the most widely used on the roads as the autonomous vehicle guidance. It is generally composed of thermoplastic resin, pigments, and fillers. The addition of FT wax 120 can improve the dispersibility of pigment and filler in thermoplastic resin, and improve paint fluidity, prevent sedimentation, adjust viscosity, improved wear and stain resistance.

King Honor International KH FT WAX 105 use the feedstock from coal, They have the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.

King Honor International KH Paraffin Wax 80N/L/H is having high melting point and fine crystalline structure.

King Honor International KH Paraffin Wax F66N/L/H contains more straight links. According to customers' application, the oil content and penetration could be adjusted. We also supply the granular form, slab form, and liquid form. The global supply of this grade is very limited, for the reason of the crude oil and the production process. In order to meet the customers' demand, our R&D department will keep on working to find out the solution.

King Honor International KH Paraffin wax 80M is a light color and congealing point ranges from 80-85℃(176-185 F). It’s produced from the dewaxing of base oil in the refinery process. By the deep refinery, it has the fine microcrystalline structure, meanwhile has a small part of the linear structure as paraffin wax. It has the good capability with paraffin wax and applied well in rubber protective wax. With the development of our technology, our categories of microcrystalline waxes are kept abundant.

King Honor International Micronized Solvent-Base Wax KH PEW-0205B is suitable for solvent flexographic inks and solvent gravure inks. It can greatly improve the wear resistance of solvent-based inks, reduce the friction coefficient of inks. It has good adaptability to benzene-soluble inks, alcohol-soluble inks, and ester-soluble inks. To improve the wear resistance and scratch resistance of various surface coatings. In different systems, the dosage is generally 0.5% ~ 3%.