Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Chemical Composition
Proprietary ester/amide/carboxylate chemistry
Features & Benefits
- Fluids & Lubricants Features
- Product Advantages
- Ashless rust inhibitor with an acid number less than 110 mg KOH/g
- Good demulsification properties
- No detrimental effect on FZG performance
- Friction modifier when used in conjunction with EP/AW additives
- Good thermal and hydrolytic stability
- Biodegradability >90% per CEC-L-33-A-93
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Use Level
- 0.05% - 1.0% (Circulating oils), 0.25% - 1.0% (Paper machine oils), 0.50% - 3.0% (Greases), 0.10% - 1.0% (Industrial and automotive gear oils), 0.05% - 0.5% (Hydraulic fluids)
- Product Uses
- K- CORR 100 is a 100% active ashless rust inhibitor with a relatively low acid number compared to succinic acid half esters. K-CORR® 100 is an excellent rust inhibitor for formulating ashless rust and oxidation oils, hydraulic oils, paper machine oils, and industrial and automotive gear oils.
- K- CORR 100 displays synergistic effects in the Four Ball Wear (ASTM D 4172) test when used in combination with ashless phosphorus-containing antiwear additives or sulfur-containing EP additives.
- K-CORR® 100 is well suited for formulating automotive CV-Joint greases used in combination with EP/AW additives.
Properties
- Physical Form
- Appearance
- Clear amber moderately viscous liquid
- Insoluble in
- Water
- Soluble in
- Petroleum, Most common solvents, Synthetic lubricant base stocks
- Typical Properties
- Note
It is recommended to verify the solubility in the base oils used and the compatibility with other additives.
Value | Units | Test Method / Conditions | |
Viscosity (at 40°C) | 470 | cSt | ASTM D 445, DIN 51 550 |
Viscosity (at 100°C) | 22 | cSt | ASTM D 445, DIN 51 550 |
Density (at 25°C) | 1.03 | g/mL | ASTM D 4052 |
Weight (at 25ºC) | 8.6 | lbs/gallon | — |
Total Acid Number | 107 | mg KOH/g | Potentiometric |
Flash Point | 165 | °C | ASTM D 92, DIN 51 376, Cleveland Open Cup (COC) |
Nitrogen Content | 2.7 | % | — |
Packaging & Availability
- Packaging Type
- Standard Packaging
420 lbs (191 kg) closed head drum
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions
- Formation of haze or crystallization may occur during storage. If this occurs, warming to 40-50°C with agitation will reconstitute the product.
- Avoid overheating to temperatures above 60°C.
- Store in a cool, dry place away from any direct source of heat and moisture.
- Maximum recommended storage temperature: 46°C (115°F)
- Handling
- Avoid all personal contact.
- Observe good personal hygiene.