Products

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

NA-LUBE® KR-023 is a unique additive & base oil modifier offering excellent hydrolytic and thermo-oxidative stability. It is recommended for high temperature and extreme low volatility applications.

NA-LUBE® KR-019 is a unique additive & base oil modifier offering excellent hydrolytic and thermo-oxidative stability. It is recommended for higher temperature applications where low volatility is critical.

NA-SUL® 420 is an easily emulsifiable rust preventive concentrate ideally suited for the protection of metal parts during storage.

NACURE® SC-25 is an amine neutralized p-TSA catalyst used to increase the cure response of thermoset waterborne and solventborne coatings that contain amino resin crosslinking agents.

NA-SUL® BSN-HT is a high performance rust and corrosion inhibitor offering exceptional rust protection with outstanding high temperature stability and good demulsibility in petroleum and synthetic lubricants.

K-CORR® G-1360 is a proprietary zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate.

K-CORR® SD-1223C (formerly KX1223C) is a multifunctional ashless substituted polyamine surfactant / dispersant for lubricants that exhibits antioxidant and wear protection boosting properties.

NA-SUL® CA-1259 is a high performance liquid rust and corrosion inhibitor for rust preventives and dewatering fluids. It offers excellent solubility in a wide range of mineral oils, esters and vegetable oils. NA-SUL® CA-1259 is less viscous than many other additives of its type and may often be able to be cold blended into oils. This results in lower energy cost and faster processing. NA-SUL® CA-1259 has an exceptional ability to help to separate water from oil and oil/solvent solutions making it very suitable for dewatering fluid applications. The solubility of NA-SUL® CA-1259 should be verified in the diluents that are being considered for use.

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

NA-LUBE® EP-5425 is a light colored, low odor sulfurized olefin/fatty oil with excellent extreme pressure properties.

DISPARLON® AQ-610 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions.

DISPARLON® LHP-95 is a silicone-free surface control additive based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

DISPARLON® AQ-330 is a solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with metallic and pearlescent pigments in waterborne coating systems without co-solvents.

NACURE® 115 is a strong hydrophobic sulfonic acid catalyst designed for use in bake d amino crosslinked systems. This high active catalyst is designed to help improve direct-to-metal intercoat adhesion properties while maintaining excellent exterior durability.

NA-SUL® BSN is a premium non-staining rust inhibitor for petroleum and synthetic lubricants, greases, rust preventive fluids and metalworking specialties. It provides excellent demulsibility and resistance to the negative effects of water and is compatible with a wide range of additives and base oils.

NACURE® 4167 is an amine neutralized phosphate catalyst. It is a weak acid catalyst that is particularly effective with polymeric or high imino melamines and phenolics.

K-CORR® NF-410 is a premium ashless liquid multifunctional additive providing extreme pressure properties and yellow metal protecting properties by scavenging active sulfur.

NA-SUL® MG is a premium low ash rust inhibitor for industrial lubricants, greases and rust preventive fluids. It provides excellent resistance to water.

K-FLEX® XM-359 is designed to provide long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier.

NA-SUL® AS is an ashless rust and corrosion inhibitor for industrial lubricants, distillate fuels, and metalworking specialties.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

NA-LUBE® EP-5310 is a light colored, low odor inactive sulfurized fatty acid ester/fatty oil with excellent extreme pressure properties.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

NA-LUBE® AO-242 is an ashless liquid phenolic high temperature antioxidant for petroleum and synthetic based automotive and industrial lubricants and greases.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

K-FLEX® UD-350W is an aqueous solution of an aliphatic, low molecular weight urethane diol oligomer. It is recommended as a modifier for amino crosslinked water soluble and emulsified acrylic, alkyd, urethane and polyester resins. K-FLEX® UD-350W can be used as a reactive cosolvent replacement to increase solids, crosslink density, improve film/resistance properties and flow/leveling.

K-FLEX® 188 is a highly reactive, aliphatic polyester diol which is recommended for aminoplast or isocyanate crosslinked coatings, inks, sealants, elastomers, and adhesives. K-FLEX® 188 is the most versatile polyester diol in the K-FLEX® line.

K-POL® 8211 is a unique, aliphatic diol recommended for 2K PU general purpose coatings and elastomers. It provides chemical and stain resistant, scratch resistances and hard films with good flexibility.

NA-SUL® CA-1082 is a high performance liquid rust and corrosion inhibitor for rust preventives and lubricants. It offers excellent solubility in highly paraffinic oils and polyalphaolefin (PAO). NA-SUL® CA-1082 is of moderate viscosity and may often be able to be cold blended into oils. This results in lower energy cost and faster processing. Contact with alkaline materials, cleaners or metalworking fluids may cause gelling of NA-SUL® CA-1082. Compatibility test should be carried out in order to identify any negative interactions.

DISPARLON® AQH-810 is a rheology control agent composed of a hybrid compound of a polyamide and an amide wax for waterborne systems. Can be post-added to prevent sagging and pigment settling with slight viscosity increase.

NA-LUBE® KR-008 is a specialty synthetic fluid for high performance lubricants offering outstanding solubility plus excellent hydrolytic and thermo-oxidative stability.

NA-SUL® ZS is a premium rust inhibitor for petroleum and synthetic lubricants and greases. It offers excellent demulsibility, improved oxidative stability, and resistance to the effects of water.