Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Chemical Composition
Proprietary carboxylic acid/amide chemistry
Features & Benefits
- Fluids & Lubricants Features
- Product Advantages
- Ashless rust inhibitor with an acid number below 100 mg KOH/g
- Excellent solubility in low polarity base oils
- Good hydrolytic and thermal stability
- No detrimental influence on the AFNOR dry and wet filtration tests
Applications & Uses
- Applications
- Fluids & Lubricants Type
- Fluids & Lubricants End Use
- Use Level
- 0.25% - 1.0% (Paper machine oils), 0.10% - 1.0% (Industrial and automotive gear oils), 0.05% - 0.5% (Hydraulic fluids, ashless), 0.05% - 1.0% (Circulating and compressor oils)
- Product Uses
- K- CORR 1031is a 100% active ashless rust inhibitor with a relatively low acid number compared to succinic acid half esters.
- K-CORR® 1031 is well suited for formulating ashless rust and oxidation oils, hydraulic oils, paper machine oils, and industrial and automotive gear oils.
- K- CORR 1031 has excellent solubility in low polarity base oils such as PAO and severely hydrotreated Group II and Group III base oils.
Properties
- Physical Form
- Appearance
- Clear amber moderately viscous liquid
- Insoluble in
- Water
- Soluble in
- Petroleum, Most common solvents, Synthetic lubricant base stocks
- Typical Properties
- Note
It is recommended to verify the solubility in the base oils used and the compatibility with other additives.
| Value | Units | Test Method / Conditions | |
| Viscosity (at 40°C) | 1030 | cSt | ASTM D 445, DIN 51 550 |
| Viscosity (at 100°C) | 50 | cSt | ASTM D 445, DIN 51 550 |
| Density (at 25°C) | 1.01 | g/mL | ASTM D 4052 |
| Weight (at 25ºC) | 8.4 | lbs/gallon | — |
| Total Acid Number | 90 | mg KOH/g | Potentiometric |
| Flash Point | 160 | °C | ASTM D 92, DIN 51376, Cleveland Open Cup (COC) |
| Nitrogen Content | 3.3 | % | — |
Packaging & Availability
- Packaging Type
- Standard Packaging
440 lbs (200 kg) closed head drum
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions
- Formation of haze or crystallization may occur during storage. If this occurs, warming to 40-50°C with agitation will reconstitute the product.
- Avoid overheating to temperatures above 60°C.
- Store in a cool, dry place away from any direct source of heat and moisture.
- Maximum recommended storage temperature: 46°C (115°F)
- Handling
- Avoid all personal contact.
- Observe good personal hygiene.