Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Chemical Composition
Mixture of organic amino acid and imidazoline derivative
Features & Benefits
- Fluids & Lubricants Features
- Product Advantages
- Boosts performance of corrosion inhibitors for difficult applications.
- Effective at low treat levels.
- Excellent solubility in most oils.
- Improves humidity and salt fog performance.
Applications & Uses
- Applications
- Use Level
- 1.0% - 3.0% (Corrosion inhibitor booster for special applications)
- Product Uses
- K-CORR® 1227 is designed to be used in combination with NA-SUL® corrosion inhibitors for especially demanding applications. K-CORR® 1227 improves salt fog and humidity corrosion resistance. It is highly recommended for applications where corrosive solids of combustion are deposited on metal surfaces.
- It is recommended to check K-CORR® 1227 for compatibility with other additives or chemicals that may contaminate the fluid in actual use. K-CORR® 1227 slowly solidifies at room temperature. This does not affect corrosion performance.
- To reincorporate solids, heat briefly to 60°C (140°F), with stirring. Alternatively, K-CORR®1227 containing solids may be added to the final formulation and heated to the above temperature at that time.
Properties
- Physical Form
- Appearance
- Moderately viscous clear amber liquid
- Soluble in
- Petroleum, Most common solvents, Synthetic lubricant base stocks
- Typical Properties
- Note
It is recommended to verify the solubility in the base oils used and the compatibility with other additives. K-CORR® 1227 is slightly emulsifiable in hot water.
Value | Units | Test Method / Conditions | |
Specific Gravity (at 25°C) | 0.96 | — | ASTM D 4052 |
Flash Point | min. 150 | °C | ASTM D 92, DIN 51 376 |
pH | 7.4 | — | KI-250 |
Acid Value | 80 | mg KOH/g | KI-502 |
Packaging & Availability
- Packaging Type
- Standard Packaging
430 lbs (195 kg) closed head drum
Storage & Handling
- Shelf Life
- 3 Years
- Storage Conditions
- Store in a cool, dry place away from any direct source of heat and moisture.
- Maximum recommended storage temperature:46°C (115°F).
- If solids form during storage, heat to 60°C (140°F) with stirring to restore homogeneity
- Handling
- Avoid all personal contact.
- Observe good personal hygiene.