Knowde Enhanced TDS
Identification & Functionality
- Fluids & Lubricants Functions
- Technologies
- Product Families
- Chemical Composition
Calcium dinonylnaphthalene sulfonate/carboxylate, alkanolamines, ester
Features & Benefits
- Labeling Claims
- Fluids & Lubricants Features
- Product Advantages
- Excellent rust and corrosion inhibitor
- Deposits extremely thin hydrophobic films
- No mineral oil, biodegradable ester carrier
- Coating is easily removed with alkaline cleaner
- Emulsions form easily with moderate stirring
- Coating @ 5% is dry; Coating @ 10% is nearly dry
- Low foam
Applications & Uses
- Applications
- Product Applications
Water Emulsifiable Rust Preventive Fluids for protection of steel parts during storage and transportation
- Product Uses
- NA-SUL® 450 is a rust preventive concentrate that is designed to easily form stable emulsions by adding to water with moderate stirring. Emulsions of NA-SUL® 450 deposit thin, hydrophobic protective films, providing excellent humidity protection with moderate salt fog protection at higher concentrations.
- Protective films of NA-SUL® 450 provide effective rust protection even in 100% condensing humidity conditions, yet are also easily removed with alkaline cleaner.
- NA-SUL® 450 dries quickly, leaving a thin dry to the touch film from concentrations of 5% or less than 1% to 8% NA-SUL® 450 in water.
Properties
- Physical Form
- Appearance
- Dark brown liquid
- Soluble in
- Vegetable oils, Esters, Some mineral oils
- Typical Properties
- Note
NA-SUL® 450 forms emulsions in water at use levels of 1% to 10% with moderate stirring.
| Value | Units | Test Method / Conditions | |
| Viscosity (at 40°C) | 660 | cSt | ASTM D 445, DIN 51 550 |
| Density (at 15.6°C) | 0.99 | g/mL | ASTM D 4052 |
| Weight (at 25ºC) | 8.2 | lbs/gallon | — |
| Flash Point | 100 | °C | ASTM D 92, DIN 51 376, Cleveland Open Cup (COC) |
| Calcium Content | 0.7 | % | — |
Packaging & Availability
- Packaging Type
- Standard Packaging
430 lbs (195 kg) closed head drum
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions
- Do not freeze. Best if stored above 10°C (50°F). If stored below 10°C, before using heat between 40°C and 50°C with stirring. Rust protection is not affected, but emulsion stability is reduced.
- Store in a cool, dry place away from any direct source of heat and moisture. Keep storage containers tightly closed.
- Maximum recommended storage temperature: 46°C (115°F)
- Best if used within 12 months from manufacture. After 6 months from date of manufacture, NA-SUL® 450 should be stirred at between 40°C (105°F) and 50°C (120°F) to restore uniformity and performance. Do not exceed 60°C (140°F) to avoid loss of emulsion stability.
- Handling
- Avoid all personal contact.
- Observe good personal hygiene.