Products

K-FLEX® UD-320 is a high solids, aliphatic, low molecular weight urethane diol oligomer. It is soluble in polar organic solvents and has broad compatibility with acrylic, polyester, and alkyd resins. K-FLEX® UD-320 will increase the hardness of a melamine crosslinked system. When used to modify a 2-component polyurethane, it will increase hardness and flexibility. K-FLEX® UD-320 responds best to a zirconium chelate catalyst when used in isocyanate crosslinked systems.

K-FLEX® A307 is a low viscosity, 100% solids linear, saturated, aliphatic polyester diol. This product is designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems.

K-FLEX® A308 is a low-viscosity polyester diol designed as a flexibility modifier for acrylic/isocyanate and acrylic/melamine systems. K-FLEX® A308 provides good hardness and adhesion while allowing lower VOC levels.

DISPARLON® UVX-188 is an excellent defoaming additive based on special vinyl polymers. Specially designed for defoaming of epoxy UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® AQ-610 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions.

DISPARLON® OX-70 is a silicone-free, acrylic surface control additive that provided strong defoaming and leveling properties Particularly effective in high-viscosity paints which require a strong defoaming agent, such as epoxies, floor coatings and multi-component systems.

DISPARLON® 6650 is a powder polyamide which, through heat activation, develops a strong thixotropic network, providing excellent anti-sag properties and improved recoatability to coatings while being cost effective.

K-FLEX® XM-332 is an ultra low-viscosity polyester polyol modifier resin designed to provide improved flexibility in solvent-based, high solids and solventless systems. Compared to other K-FLEX® polyester diols, XM-332 produces the softest films. K-FLEX® XM-332 is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems.

DISPARLON® UVX-189 is an excellent defoaming additive based on special vinyl polymers. It is specially designed for defoaming of epoxy and acrylic UV coatings imparting excellent air-release at any stage from coating manufacturing to film forming.

DISPARLON® L-1984N is a silicone-free, acrylic polymer surface control agent for leveling properties in medium polarity systems. Recommended for acrylic coatings including high solids melamine and 2K urethanes. L-1984N has lower surface tension than L-1980N and can be used where greater wetting is required.

DISPARLON® NSH-8430HF is a surface control additive based on specially prepared acrylic/silicone copolymers designed for baking paints such as acrylic/melamine, alkyd/melamine, polyester/melamine and acid/epoxy paint for automotive and appliance applications. This product strongly prevents cratering caused by dirt/stain contamination, and gives excellent wetting over low surface tension coatings such as some of the new high-polarity automotive OEM coatings.

DISPARLON® AQ-870 is a polyamide based rheology control agent for waterborne systems. A 3-D network structure is formed to prevent sagging and pigment settling. AQ-870 can be easily added into systems with a dissolver.

DISPARLON® 4200-20 is an oxidized polyolefin based thixotropic agent designed to prevent pigment settling and hard caking, with little effect on viscosity. It works synergistically with other rheological additives.

NACURE® 5414 is a polymeric blocked sulfonic acid ester catalyst recommended for use with amino crosslinking resins.

NACURE® 5076 is a strong acid catalyst based on Dodecylbenzenesulfonic acid (DDBSA) supplied at 70% active in Isopropanol.

NACURE® 3525 is an amine neutralized Dinonylnaphthalenedisulfonic acid (DNNDSA) catalyst that utilizes a slower releasing amine for higher bake temperatures. NACURE® 3525 is formulated for increased solubility, especially in high solids polyester and alkyd formulations.

DISPARLON® NS-30 is a patented blend of polyolefin with amide in xylene in paste form. This product effectively prevents sagging and settling of solvent-based coatings including those containing anti-corrosive pigments at high concentrations. NS-30 has little effect on viscosity, while still imparting strong anti-sagging/anti-settling properties.

DISPARLON® DA-325 is a solvent-free wetting and dispersing agent based on an amine salt of polyether phosphate, designed for dispersing pigments in Solvent-free coating systems. Effective with filler, organic, and inorganic pigments.

K-KAT® 4205 is a zirconium chelate catalyst that provides extended pot life and selectivity to NCO/OH reactions for reduced gassing in 2K PU systems. It is efficient for ambient and low temperature cure coatings.

NACURE® SC-52 is an amine neutralized aromatic sulfonic acid, high activity catalyst. It provides excellent balance of cure response and package stability.

DISPARLON® AQ-330 is a solvent-free wetting and dispersing agent based on a polymer containing phosphoric acid ester groups, designed for use with metallic and pearlescent pigments in waterborne coating systems without co-solvents.

NACURE® XC-235 is an acid phosphate catalyst supplied at 75% active in n-butanol. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

DISPARLON® 4200-10 is a flowable paste of polyolefin wax in xylene consisting of fine particles of 5 μ or less. This thixotropic agent can be post added to prevent pigment settling and hard-caking during storage or during coating application with little effect on viscosity.

DISPARLON® 6300 is a hybrid powdered thixotropic agent based on amide wax. Low activation temperature is required to build a strong thixotropic network which provides excellent anti-sag properties along with good recoatability and minimal viscosity increase. It is especially effective in epoxy coatings and adhesives.

DISPARLON® LHP-96 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.

DISPARLON® 6500 is a unique non-reactive polyamide thixotrope supplied as a powder. Through heat activation a strong thixotropic network provides strong anti-sagging and Anti-slumping without seeding or loss of effectiveness on aging. It is effective in caotings, sealants and adhesives formulations.

DISPARLON® L-1980N is silicone-free acrylic polymer surface control agent for high polarity solventborne systems. Recommended for use in polyester/melamine and urethane coatings and in unsaturated polyester applications for leveling and defoaming properties.

DISPARLON® PFA-231 is a thixotropic agent in paste form consisting of a specially prepared amide wax activated in aromatic free solvent. Develops an exceptionally strong thixotropic structure for anti-settling and anti-sag properties in a wide variety of applications and resin systems.

NACURE® 155 is a hydrophobic sulfonic acid catalyst based on dinonylnaphthalene disulfonic acid supplied as a 55% concentrate in isobutanol. Its primary use is as a catalyst for promoting the cure of hydroxy, carboxy and amide functional polymers with melamine and urea-formaldehyde crosslinking agents.

DISPARLON® AQ-200 is an acrylic copolymer leveling agent designed to improve leveling of the film keeping good re-coatability in waterborne systems.

DISPARLON® AQ-607 is a polyamide based rheology control agent for waterborne systems. The 3-D network structure prevents sagging and pigment settling. Recommended for emulsions and dispersions for best compatibility.

K-POL® 8211 is a unique, aliphatic diol recommended for 2K PU general purpose coatings and elastomers. It provides chemical and stain resistant, scratch resistances and hard films with good flexibility.

NACURE® 2501 is an amine blocked Toluenesulfonic acid (TSA) catalyst that has been formulated for higher electrical resistivity. Compared to NACURE® 2500, NACURE® 2501 will have improved ketone solubility, and lower conductance and higher electrical resistance.

DISPARLON® 1970 is a silicone-free, high molecular weight surface control agent. The product acts as a leveling agent with a defoaming effect in high polarity solventborne systems such as polyester bake applications, high build urethanes and high solids.

DISPARLON® EZ-777 is an easily dispersible paste of specially activated synthetic amide wax. It is easily incorporated into many solventborne systems to develop an exceptionally strong and long retained thixotropic structure.

DISPARLON® LHP-91 is a silicone modified surface control agents based on specially prepared acrylic and vinyl polymers. These products have unique properties that allow them to eliminate cratering caused by various kinds of surface contaminants and spray mists, and promote leveling of the coating.